Whirlpool WFW8740DW Use & Care Guide - Page 11
Select CYCLE, Adjust settings, if desired, Select any additional options, Setting a delayed wash
View all Whirlpool WFW8740DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. Select CYCLE* 10. Select any additional options* Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features. 9. Adjust settings, if desired* To add an option to the cycle, touch its name - Clean Boost with Steam, Extra Rinse, TumbleFresh, or Cycle Signal. To remove an option from the selected cycle, touch the option again. 11. Setting a delayed wash The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Wash Temp, Spin, Soil, or Presoak. Adjusting settings will change the Estimated Time Remaining. Tightly packing the load, unbalanced loads, or excessive suds may also cause the washer to increase the cycle time. If you do not want to begin a cycle immediately, you may choose the DELAY WASH option. This will delay the start of the wash cycle by up to 8 hours. To set a delayed wash: 1. Touch DELAY WASH + and - buttons to set the desired delay time. 2. Touch and hold START to set the delay. The delay countdown has started when the START light stops blinking. *Not all options and settings are available with all cycles. See "Cycle Guide" for available options and settings. 11