Whirlpool WFW9150WW Dimension Guide - Page 1

Whirlpool WFW9150WW Manual

Get Whirlpool WFW9150WW PDF manuals and user guides
UPC - 883049188102
View all Whirlpool WFW9150WW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Front-Loading Automatic Washer PRODUCT MODEL NUMBERS WFW9150W Electrical: A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided. Drain System Options Standpipe drain system - wall or floor (views A & B) The standpipe drain requires a minimum diameter standpipe of 2" (50 mm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute. The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2.4 m) from the bottom of the washer. 30" min. (762 mm) Washer dimensions 501/4" (1276 mm) OVERALL DIMENSIONS 27" (686 mm) Custom undercounter installation-dryer only 2" (50 mm) 36" min. 36" (914 mm) (914 mm) 48 in.2* (310 cm2) (251m" m3) " 27" (686 mm) (76 mm) 1" (25 mm) 301/2" (775 mm) 3" (76 mm) For closet installation, with a door, the minim(1u2545minc.m2*v2)entilation openings in the top and bottom of the door are required. Louvered doors with equivalent air ventilation openings are acceptable. 1" (25 mm) 48" (1220 mm) 48 in.2 (310 cm2) 3" (76 mm) 12" (305 mm) A B Laundry tub drain system (view C) The laundry tub needs a minimum 20 gal. (76 L) capacity. The top of the laundry tub must be at least 30" (762 mm) above the floor. Floor drain system (view D) The floor drain system requires a siphon break that may be purchased separately. See "Tools and Parts." The siphon break must be a minimum of 28" (710 mm) from the bottom of the washer. Additional hoses might be needed. 24 in.2 (155 cm2) 1" (25 mm) 301/2" 4" (775 mm) (102 mm) A 3" (76 mm) B 38" min. (965 mm) 51/4"** (133 mm) 72" (1829 mm) 1"*** (25 mm) 27" 1"*** (686 mm) (25 mm) 30" min. (762 mm) 28" min. (710 mm) C D 1" (25 mm) 27" (686 mm) 1" 1" 301/2" 4" (25 mm) (25 mm) (775 mm) (102 mm) For cabinetAinstallation, with a doBor, the minimum ventilation openings in the top are required. 7" 7" (178 mm) (178 mm) 9" (229 mm) 4" (102 mm) 311/2" 1" 27" 1" (800 mm) (25 mm) (686 mm) (25 mm) Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10252714A 10/2009

  • 1
Front-Loading Automatic Washer
PRODUCT MODEL NUMBERS
OVERALL DIMENSIONS
WFW9150W
Electrical:
A 120 volt, 60 Hz., AC only, 15- or 20-amp,
fused electrical supply is required. A time-delay fuse
or circuit breaker is recommended. It is recommended
that a separate circuit serving only this appliance
be provided.
5
0
1
/
4
"
(1276 mm)
27
"
(686 mm)
36
"
(914 mm)
30
1
/
2
"
(775 mm)
27
"
(686 mm)
1
"
(25 mm)
1
"
(25 mm)
2
" (50 mm)
36
" min.
(914 mm)
Custom undercounter installation-dryer only
Washer dimensions
Because Whirlpool Corporation policy includes a continuous commitment to improve
Dimensions are for planning purposes only. For complete details, see Installation
our products, we reserve the right to change materials and specifications without notice.
Instructions packed with product. Specifications subject to change without notice.
Ref. W10252714A
10/2009
For closet installation, with a door, the minimum ventilation openings in the top
and bottom of the door are required. Louvered doors with equivalent air ventilation
openings are acceptable.
For cabinet installation, with a door, the minimum ventilation openings in the top
are required.
Drain System Options
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter
standpipe of 2" (50 mm). The minimum carry-away
capacity can be no less than 17 gal. (64 L) per minute.
The top of the standpipe must be at least 30" (762 mm)
high and no higher than 96" (2.4 m) from the bottom
of the washer.
Laundry tub drain system (view C)
The laundry tub needs a minimum 20 gal. (76 L)
capacity. The top of the laundry tub must be
at least 30" (762 mm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break that
may be purchased separately. See “Tools and Parts.”
The siphon break must be a minimum of 28" (710 mm)
from the bottom of the washer. Additional hoses might
be needed.
30
" min.
(762 mm)
A
B
30
" min.
(762 mm)
28
" min.
(710 mm)
C
D
3
"
(76 mm)
48
"
(1220 mm)
3
"
(76 mm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1
"
(25 mm)
4
"
(102 mm)
30
1
/
2
"
(775 mm)
27
"
(686 mm)
1
"***
(25 mm)
12
" (305 mm)
1
"***
(25 mm)
5
1
/
4
"**
(133 mm)
72
"
(1829 mm)
31
1
/
2
"
(800 mm)
1
"
(25 mm)
4
"
(102 mm)
1
"
(25 mm)
9
"
(229 mm)
7
"
(178 mm)
7
"
(178 mm)
27
"
(686 mm)
38
" min.
(965 mm)
1
"
(25 mm)
27
"
(686 mm)
1
"
(25 mm)
1
"
(25 mm)
4
"
(102 mm)
30
1
/
2
"
(775 mm)