Whirlpool WFW9151YW Use & Care Guide - Page 21
Load may be out of balance.
View all Whirlpool WFW9151YW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
TROUBLESHOOTING First try the solutions suggested here or visit our website at www.whirlpool.com/help for assistance and to possibly avoid a service call. If you experience Possible Causes Washer not performing as expected (cont.) Solution Cycle time changes or Normal washer operation. cycle time too long Excessive suds in washer. The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load. The options you select will also affect the cycle times that are shown in the "Cycle Guide." When excessive suds are detected, a special suds routine automatically starts to remove extra suds and ensure proper rinsing of your garments. This routine will add time to the original cycle. Load may be out of balance. Not using correct cycle for load type. When load unbalance occurs, a washing process will start to redistribute the load. This extends the cycle time. Avoid washing single items. Balance a single item such as a rug or jacket with a few extra items. Spin time is added if an unbalanced load is detected. The washer will attempt to redistribute the load with additional tumbling. The Small Load cycle is designed for smaller load sizes (3-5 items) of lightly soiled garments. If larger loads are washed in this cycle, wash time will be increased. When using the Small Load or Delicate cycles, you should wash small loads. This ensures a gentle wash for your garments without increasing cycle times. 21