Whirlpool WGD70HEBW Installation Guide - Page 20

Reinstall hinge and latch on, opposite sides, Reinstall inner door assembly, Reinstall door on dryer

Get Whirlpool WGD70HEBW PDF manuals and user guides View all Whirlpool WGD70HEBW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

5. R einstall hinge and latch on opposite sides 7. Reinstall door on dryer Using a TORX® T25 screwdriver, reinstall the latch plate and latch backing plate with the 3 TORX screws removed earlier and the hinge assembly with the 5 screws on the opposite sides from which they were removed. 6. Reinstall inner door assembly Bottom of door Using a TORX T25 screwdriver, remove the 4 screws on the dryer. Insert the tabs on the hinge into the mounting slot and slide down to engage the top tab. Secure in place with the 4 TORX T25 screws removed earlier. Reverse door swing square-shaped door 1. Remove door from dryer Position the door with the inside of the door facing up. Reinstall the 10 screws securing the inner door to the outer door. Using a TORX T25 screwdriver, remove the 4 screws securing the door hinge to the dryer and lift up and out to remove the door. Place the door on a soft towel or other non-scratch surface. Retain or set aside the 4 screws. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
20
5.
Reinstall hinge and latch on
opposite sides
Using a TORX
®
T25 screwdriver, reinstall the latch plate and
latch backing plate with the 3 TORX screws removed earlier
and the hinge assembly with the 5 screws on the opposite
sides from which they were removed.
6.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
7.
Reinstall door on dryer
Using a TORX T25 screwdriver, remove the 4 screws on the
dryer. Insert the tabs on the hinge into the mounting slot and
slide down to engage the top tab. Secure in place with
the 4 TORX T25 screws removed earlier.
Bottom
of door
Reverse door swing square-shaped door
1.
Remove door from dryer
Using a TORX T25 screwdriver, remove the 4 screws securing
the door hinge to the dryer and lift up and out to remove the
door. Place the door on a soft towel or other non-scratch
surface. Retain or set aside the 4 screws.