Whirlpool WGD7500GC W11040073A Whirlpool Agora Dryer - Page 9
Touch and hold START/PAUSE
View all Whirlpool WGD7500GC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TIMED DRY Cycle: When you select Timed Dry, the default time appears in the display. Touch "+" and "-" to increase or decrease the time in 1 minute increments. Touch and hold to change the time in 5 minute increments. The default temperature may be changed by touching Temperature until the desired dry temperature is lit. 5. Adjust cycle modifiers, if desired 8. R emove garments promptly after cycle is finished You may adjust different settings, depending on what you are drying and how you are going to dry the items. Selecting Sanitize will override all other modifiers. See the "Cycle Guide" for detailed information. NOTE: Not all options and modifiers are available with all cycles. 6. Select any additional options Add additional options such as Drum Light, Wrinkle Shield™, Signal, and/or Damp Dry Signal by touching that option. If you will be unable to remove the load promptly, select Wrinkle Shield™ before touching START/PAUSE. NOTE: Not all options and settings are available with all cycles. 7. Touch and hold START/PAUSE to begin cycle Promptly remove garments after cycle has completed to reduce wrinkling. Changing the Automatic Cycle settings to increase or decrease drying time If all your loads on all Automatic cycles are consistently less dry or more dry than you would like, you may change the default settings to increase or decrease the default dryness level. Your automatic drying settings can be adjusted to adapt to different installations, environmental conditions, or personal preference. This change is retained and will affect all of your Automatic cycles, not just the current cycle/load. There are five drying settings, which are displayed using the LED display: 0 Much wetter clothes, 30% less drying time. 1 Slightly wetter clothes, 15% less drying time. 2 Factory preset dryness level. 3 Slightly drier clothes, 15% more drying time. 4 Much drier clothes, 30% more drying time. To change the drying settings: 1. Before starting a cycle, touch and hold DRYNESS for 6 seconds. 2. Touch DRYNESS to select the dryness level shown in the time display: 0, 1, 2, 3, or 4. 3. Touch START/PAUSE to save the new dryness level setting. NOTE: The settings cannot be changed while the dryer is running or paused. The dryer must be in standby mode (power is off) to adjust the default settings. Touch and hold START/PAUSE to begin the cycle. 9