Whirlpool WGD8300SW Use and Care Guide - Page 5

QUICK START GUIDE NOTE: This Use and Care Guide covers several different models. Your dryer may not have all of the cycles and features described. WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. The following is a guide to using your dryer. Please refer to specific sections of this manual for more detailed information. START 1. Clean lint screen before each load. 2. Place laundry in dryer and shut door. 3. Press POWER. 4. Select AUTO or MANUAL Cycle. 5. Select WRINKLE SHIELD™ feature, if desired. See "Additional Features." 6. Select END OF CYCLE SIGNAL to turn off, if desired. See "Additional Features." 7. Press and Hold START to start. AUTO CYCLES Auto Cycles match the cycle setting to the type of load, and adjust Dryness for optimal performance. See "Auto Preset Cycle Settings Chart." To make changes to the Dryness and/or Options during an Auto Cycle: 1. Press PAUSE/CANCEL once. 2. Select DRYNESS and/or OPTION. NOTE: Dryness level selections can be made only while using Auto Cycles. Selecting More Dry, Normal, or Less Dry automatically adjusts the sensed time needed. 3. Press and Hold START. MANUAL CYCLES Use Manual cycles for timed drying. 1. Press POWER. 2. Rotate the dial to a Manual Cycle. 3. Press TIMING up or down arrow buttons until the desired drying time is displayed. 4. Press TEMP ADJUST until the desired temperature illuminates. 5. Press and Hold START. To make changes during a Timed Dry Cycle: 1. Press PAUSE/CANCEL once. 2. Adjust the Time, Temperature, WRINKLE SHIELD™ feature, and End of Cycle Signal. 3. Press and Hold START. TIMED DRY - Use this cycle if items are still damp after an Auto cycle. QUICK DRY - Use for items requiring a short drying time. TOUCH UP - Use this cycle to help smooth out wrinkles from clean, dry clothes. STOPPING OR RESTARTING To pause/stop the dryer at any time - Open the door or press PAUSE/CANCEL once. To restart the dryer - Close the door. Press and Hold START button until dryer starts. To cancel the dryer at anytime - Press PAUSE/CANCEL twice. 5