Whirlpool WGE745C0FE Owners Manual - Page 5
To set a Timed Cook or a Delayed Timed Cook, see the Cook Time BROIL UPPER
View all Whirlpool WGE745C0FE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Keypad FROZEN BAKE (upper only) BROIL UPPER BROIL LOWER CONVECT (lower only) KEEP WARM UPPER KEEP WARM LOWER START TIME COOK TIME WARM ZONE ON/OFF PRECISE CLEAN START LOWER hold 3 sec. Feature Instructions Prepackaged food 1. Position the food on a flat rack in the oven on rack position 1. See the "Positioning Racks and Bakeware" section. NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™ Technology. 2. Press FROZEN BAKE. 3. Press the number keypad to select the desired food option. 4. Press the number keypads to set the temperature as recommended on the food packaging. 5. Press COOK TIME. 6. Press the number keypads to set the maximum cook time as recommended on the food packaging. 7. Press START. The range will calculate the best cook time based on the current oven temperature. NOTE: The cook time that appears in the display is the estimated required cook time as calculated by the oven control. It may be different than the time you entered. A beep will alert you to check the food's doneness with at least 2 minutes remaining on the timer. Follow the prompts on the display to select more time if desired. 8. At the end of the cook time, a beep will alert you to check the food's doneness. Follow the prompts on the display to select more time if desired. Unless more time is selected, the bake element turns off. 9. Press CANCEL when finished. Broiling 1. Press BROIL for the desired oven. 2. Press the number keypads as instructed by the scrolling text to set the desired temperature level. 3. Press START for the selected oven, and then allow the oven to preheat for 5 minutes. 4. Position the cookware in the oven and leave the door open 41/2" (11.4 cm) at the broil stop position. 5. Press CANCEL for the selected oven when finished. Convection cooking 1. Press CONVECT until the desired mode is displayed, and then press START LOWER. 2. Press the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range. 3. Press START LOWER. 4. To change the temperature, repeat Step 2. Press START LOWER for the change to take effect. NOTE: If cooking in both ovens, press any number on the keypad, then follow the on-screen prompts to select the desired oven before entering temperature. 5. Press CANCEL LOWER when finished. Hold warm Food must be at serving temperature before placing it in the warmed oven. 1. Press KEEP WARM for the desired oven. 2. Press the number keypads to set the desired temperature. If the temperature entered is not in the range of the temperatures allowed, the minimum or maximum allowed temperature will be displayed. Enter a temperature in the allowable range. 3. Press START for the selected oven. 4. To change the temperature, repeat steps 2 and 3. 5. Press CANCEL for the selected oven when finished. Delayed start The Start Time keypad is used to enter the starting time for an oven function with a delayed start. Start Time should not be used for foods such as breads and cakes because they may not bake properly. To set a Timed Cook or a Delayed Timed Cook, see the "Cook Time" section. Timed cooking Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of time, and/or shut off automatically. To set a Cook Time or Delayed Cook Time, see the "Cook Time" section. NOTE: If cooking in both ovens, press any number on the keypad, then follow the on-screen prompts to select the desired oven before entering temperature. Warming zone Press WARM ZONE ON to select the warming element on the cooktop. Press START. Press WARM ZONE OFF to turn off the warming element. Self-cleaning See the "Self-Cleaning Cycle" section. cycle Oven control lockout 1. Check that the ovens and timers are OFF. 2. Press and hold START LOWER for 3 seconds. 3. If enabled, a tone will sound, and "CONTROL LOCKED" will be displayed. 4. Repeat to unlock. No keypads will function when the control is locked. 5