Whirlpool WOC54EC7H Installation Instructions - Page 4
Installation Instructions
View all Whirlpool WOC54EC7H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
INSTALLATION INSTRUCTIONS Prepare Built-In Microwave/Oven Combination 4. Partially close the door to engage the door latch locks. The door will stop at this point. NOTES: ■■ Refer to the following "Installation Instructions" and the "Installation Instructions" section of the Installation Instructions provided with your built-in microwave/oven combination. ■■ Refer and adhere to the "Electrical Requirements" section and complete the instructions in the "Make Electrical Connection" section of the Installation Instructions provided with your built-in microwave/oven combination. 1. Decide on the final location for the oven. Avoid drilling or cutting into house wiring during installation. WARNING Excessive Weight Hazard Use two or more people to move and install oven. Failure to do so can result in back or other injury. 5. Using two hands, grasp the edges of the oven door. Lift and pull the oven door toward you and remove. You may need to gently shift door from side to side as you pull. 2. To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting. 3. Remove the shipping materials and tape from the oven. Remember to keep the corner posts and other materials that may be needed for installation. 4. Remove the hardware package from inside the bag containing literature. 5. Move oven and cardboard close to the oven's final location. Remove Oven Door IMPORTANT: Use two hands to remove oven door(s). 1. Prior to removing the oven door, prepare a surface where you will place it. This surface should be flat and covered with a soft blanket, or use the corner posts from your packaging material. 2. Open the oven door. 3. Locate the oven door hinge locks in both corners of the oven door, and rotate the hinge locks toward the oven door to the unlocked position. If the door hinge lock is not rotated fully (see illustration B), the door will not remove properly. Locked position Unlocked position 6. Set the oven door(s) aside on the prepared covered work surface, with the oven door resting on its handle. 7. To continue with the oven installation, go to the "Positioning Oven Feet" section. Grip here to rotate. A Oven door hinge lock in locked position Soft close hinge arm on select models B. Oven door hinge lock in partially unlocked position 4