Whirlpool WOCA7EC0H Installation Instructions - Page 6
Replace Oven Doors
View all Whirlpool WOCA7EC0H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Replace Oven Door(s) 1. Using two hands, grasp side edges of door at the midpoint. Face the oven cavity. 4. Make sure the door hinge notch is engaged on the bottom of the oven cavity slot. 2. Locate the slots on each side of the oven front frame for the door hinge locks. A A. Slot in the oven cavity for door hinge lock 3. Using two hands, grasp the edges of the oven door. At a 45° angle, insert the hinges at the same time, and push the oven door into the oven cavity slot to replace. You may need to gently shift the door from side to side as you push. IMPORTANT: Do not close the door at this step or damage may occur to the door hinge. 5. Lower the oven door to the fully open position. If the oven door does not open to a full 90°, repeat steps 1 through 3. 6. Locate the oven door hinge locks in the corners of the oven door, and rotate the hinge locks toward the oven cavity to the locked position. Unlocked position Locked position Soft close hinge arm on select models 7. After the door hinges have been locked, gently swing the door upward to close. The door should not be forced closed. 8. When the hinges are properly installed and the door is closed, there should be an even gap between the door and the control panel. If one side of the oven door is lower than the other, the hinge on that side is not properly installed. See the "Remove Oven Door(s)" and "Replace Oven Door(s)" sections. 6