Whirlpool WOES5027LW Owners Manual - Page 18
Make Electrical Connection, For Single Ovens, Wire Cable from Home Power Supply
View all Whirlpool WOES5027LW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Make Electrical Connection For Single Ovens WARNING Electrical Connection Options Chart If your home has: Go to section: 4-wire 4-Wire Cable from Home Power Supply Electrical Shock Hazard Disconnect power before servicing. Use 12 gauge copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. For Double Ovens WARNING 3-wire (1.13/2c"m) 3-Wire Cable from Home Power Supply 1/2" (1.3 cm) 4-Wire Cable from Home Power Supply IMPORTANT: Use the 4-wire cable from home power supply in the U.S. where local codes do not allow grounding through neutral, New Branch circuit installations (1996 NEC), mobile homes and recreational vehicles, new construction and in Canada. Electrical Shock Hazard Disconnect power before servicing. Use 8 gauge copper wire. Electrically ground oven. Failure to follow these instructions can result in death, fire, or electrical shock. This oven is manufactured with a neutral (white) power supply wire and a cabinet-connected green (or bare) ground wire. 1. Disconnect power. 2. Feed the flexible conduit from the oven through the opening in the cabinet. 3. Remove junction box cover, if it is present. 4. Install a UL listed or CSA approved conduit connector to the junction box. A. UL listed or CSA Approved conduit connector 5. Route the flexible conduit from the oven to the junction box through a UL listed or CSA approved conduit connector. 6. Tighten screws on conduit connector. 7. See "Electrical Connection Options Chart" to complete installation for your type of electrical connection. A. Cable from home power supply F. White wires B. Black wires G. UL listed wire connectors C. Red wires H. Green (or bare) ground wires D. 4-wire flexible conduit from I. UL listed or CSA approved oven conduit connector E. Junction box 1. Connect the 2 black wires (B) together using a UL listed wire connector. 2. Connect the 2 red wires (C) together using a UL listed wire connector. 3. Untwist white wire from green (or bare) ground wire coming from the oven. 4. Connect the 2 white wires (F) together using a UL listed wire connector. 5. Connect the green (or bare) ground wire (H) from the oven cable to the green (or bare) ground wire (in the junction box) using a UL listed wire connector. 6. Install junction box cover. 18