Whirlpool WRB322DMB Owners Manual 1 - Page 7

2. Remove the plastic cap from water valve inlet port. Place a compression nut and sleeve on the copper or PEX tubing. 3. Insert the end of the copper or PEX tubing into the water valve inlet port. Shape tubing slightly so that the tubing feeds straight into the port to avoid kinks. 4. Slide the compression nut over the sleeve and screw into the water valve inlet port. A. PEX water tubing C. Compression nut B. Sleeve D. Copper or PEX tubing 5. Using an adjustable wrench, hold the nut on the plastic water line to keep it from moving. Then, with a second wrench turn the compression nut on the copper tubing counterclockwise to completely tighten. Do not overtighten. A. "P" clamp B. PEX water line C. Compression nut D. Copper tubing 6. Check connection by pulling on tubing. Attach the PEX water line to the refrigerator cabinet with a "P" clamp. 7. Turn on water supply to the refrigerator and check for leaks. Correct any leaks. Complete the Installation WARNING REFRIGERATOR FEATURES Crisper Humidity Control You can control the amount of humidity in the moisture-sealed crisper. Depending on your model, adjust the control to any setting between Fruit and Vegetables or Low and High. � Fruit/Low (open) for best storage of fruits and vegetables with skins. � Vegetables/High (closed) for best storage of fresh, leafy vegetables. For information on additional features for your appliance, see online "Feature Guide." DOOR AND HANDLE INSTRUCTIONS Refrigerator Doors and Drawer TOOLS NEEDED: 5/16", 3/8", 1/4" hex head socket wrench, a Torx† T20 screwdriver, a #2 Phillips screwdriver, and a flat-blade screwdriver IMPORTANT: � Your refrigerator may have a standard reversible refrigerator door with either a freezer door or freezer drawer, or French doors. Follow the instructions specific to the door style of your model. � If you only want to remove and replace the doors, see "Remove Doors and Hinges" and "Replace Doors and Hinges." � Before you begin, turn the refrigerator control Off, and remove food and adjustable door or utility bins from the doors. Remove and Replace Door Handles REFRIGERATOR DOOR HANDLES Refrigerator Door Handle Style 1 Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug into a grounded 3-prong outlet. NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill the ice storage bin. 2. Flush the water system. See "Water and Ice Dispensers." A. 3/32" Setscrew � Using a 3⁄32" or 1⁄8" hex key, loosen the two setscrews located on the side of each handle. Pull the handle straight out from the drawer. Make sure you keep the screws for reattaching the handles. � To replace the handles, reverse the directions. 7