Whirlpool WRT348FME Owners Manual - Page 8
Reverse Refrigerator Door
View all Whirlpool WRT348FME manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
8. Depending on your model, place the handle on the shoulder screw and push the handle toward the door until the mounting base is flush against the door. 5. Remove the cap covering the hole on the opposite side of the door where the refrigerator door handle will be installed and discard the cap. A A. Setscrew 9. Fasten the bottom of the handle to the bottom of the freezer door. 10. Tighten all screws. Set aside the freezer door until the hinges and refrigerator door are in place. Reverse Refrigerator Door 1. Remove the door stop from the bottom of the refrigerator door. 6. Depending on your model, remove the shoulder screw and its washer from the left-hand side of the door and fasten it into the hole that was behind the cap. 7. Depending on your model, place the handle on the shoulder screw and push the handle toward the door until the mounting base is flush against the door. 8. Fasten the top of the refrigerator handle to the top of the refrigerator door. A AB A. Door stop screw B. Door stop 2. Replace the door stop on the opposite side of the refrigerator door, making sure that the hole in the door stop plate is aligned perfectly with the hole for the Bottom Hinge pin. 3. Fasten the door stop to the door. 4. Remove the door handles. See the model-specific graphics later in these instructions. Door Handles installed with flat-head screws and setscrews: ■■ Remove the screws from the top of the refrigerator door handle. ■■ Remove the setscrew from the lower part of the handle. ■■ Pull the handle away from the door to release it from the shoulder screw. Keep all parts together. Door handles installed with flat-head screws only: ■■ Remove the screw cover and the three flat-head handle screws. Keep all parts together. A. Flat-head handle screws 9. Cover the remaining hole with the cap (provided). 10. Remove door hinge hole plug from the refrigerator door. Move to opposite side. 11. Tighten all screws. Set aside refrigerator door until bottom hinge is installed on the opposite side of the refrigerator. 8