Whirlpool WRT359SFYB Dimension Guide - Page 1
Whirlpool WRT359SFYB Manual
View all Whirlpool WRT359SFYB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Top Mount Refrigerator PRODUCT MODEL NUMBERS WRT1L1TZY WRT311SFY WRT351SFY WRT359SFY WRT3L1SZY WRT3L9SZY WRT571SMY WRT579SMY WRT5L1SMY WRT108TFY WRT138TFY Electrical: A 115-volt, 60-Hz, AC-only, 15or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord. NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting. See "Using the Controls." Water: A cold water supply with water pressure between 30 and 120 psi (207 and 827 kPa) is required to operate ice maker and water dispenser. If you have questions about your water pressure, call a licensed, qualified plumber. IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa). Reverse Osmosis Water Supply: If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa). LOCATION REQUIREMENTS PRODUCT DIMENSIONS G F cabinet E not incl. handle D incl. handle B 4 top of cabinet 1 A overall C 90˚ Model WRT1L1TZY WRT311SFY WRT3L1SZY WRT571SMY WRT5L1SMY WRT351SFY WRT359SFY WRT3L9SZY WRT579SMY WRT108TFY WRT138TFY Height Overall "A" 661⁄4" (168.3 cm) 661⁄4" (168.3 cm) 661⁄4" (168.3 cm) 661⁄4" (168.3 cm) 661⁄4" (168.3 cm) Height Top of Cabinet "B" 651⁄2" (166.4 cm) Depth Door Open 90° "C" 621⁄4" (158.1 cm) Depth With Handles "D" 325⁄8" (82.9 cm) 651⁄2" 621⁄4" 34" (166.4 cm) (158.1 cm) (86.4 cm) 651⁄2" 621⁄4" 337⁄8" (166.4 cm) (158.1 cm) (86.0 cm) 651⁄2" 591⁄4" 337⁄8" (166.4 cm) (150.5 cm) (86.0 cm) 651⁄2" 591⁄4" 323⁄4" (166.4 cm) (150.5 cm) (83.2 cm) Depth Without Handles "E" 305⁄8" (77.8 cm) 321⁄2" (82.6 cm) 321⁄2" (82.6 cm) 325⁄16" (82.1 cm) 30 5⁄8" (82.9 cm) Depth Cabinet Only "F" 281⁄2" (72.4 cm) 281⁄2" (72.4 cm) 281⁄2" (72.4 cm) 281⁄2" (72.4 cm) 281⁄2" (72.4 cm) Width Cabinet "G" 321⁄2" (82.6 cm) 321⁄2" (82.6 cm) 321⁄2" (82.6 cm) 291⁄2" (74.9 cm) 291⁄2" (74.9 cm) 1/2" (1.25 cm) To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. Allow at least 1" (2.54 cm) between back of cabinet and the wall. If your refrigerator has an ice maker, make sure you leave some extra space at the back for the water line connections. If you are installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on the hinge side (depending on your model) to allow for the door to swing open. NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C). 2" (5. cm) Because Whirlpool Corporation policy includes a continuous commitment to improve Dimensions are for planning purposes only. For complete details, see Installation our products, we reserve the right to change materials and specifications without notice. Instructions packed with product. Specifications subject to change without notice. Ref. W10343810A 4/27/11