Whirlpool WTW5000DW Use & Care Guide - Page 5

RINSE You will hear sounds similar to the wash cycle as the washer rinses and moves the load. SPIN The washer spins the load at increasing speeds for proper water removal, based on the selected cycle and spin speed. DONE Once the cycle is complete, this light will come on. Remove the load promptly for best results. LOCKED To allow for proper load sensing and spinning, the lid will lock and the Locked light will turn on. This light indicates that the lid is locked and cannot be opened. If you need to open the lid, press START/PAUSE. The lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. NOTE: Holding the START/PAUSE Button will cancel the cycle and cause the washer to drain. Press START/PAUSE again to resume the cycle. Avoid opening the lid during sensing. The sensing process will start over when the washer is restarted. 5