Whirlpool WTW7600XW Owners Manual - Page 10

7. Select cycle 8. Select cycle settings, if desired Turn cycle knob to choose your wash cycle. Estimated Time Remaining will light up with a cycle time. You may notice time adjusting during the cycle. This is normal. If you do not want to begin a cycle immediately, you may choose the DELAY WASH option. To choose a delay time: 1. Press DELAY WASH button to select desired delay time. 2. Press START/PAUSE to set the delay. The delay countdown has started when the START/PAUSE light stops blinking. To cancel delaying a cycle: 1. Press START/PAUSE again to begin a wash cycle immediately. IMPORTANT: When delaying a cycle, use liquid HE detergent only in the dispenser. Powdered detergents may absorb moisture from a previous cycle and clump before the wash cycle begins. Once you select a cycle, the default settings for that cycle will be lit. Press the cycle settings buttons to change the Soil Level, Spin Speed, and Wash/Rinse Temperature, if desired. Not all settings are available with all cycles. NOTE: Always read and follow fabric care labels instructions to avoid damage to your garments. Wash Temp Suggested Fabrics Hot Some cold water is added to save energy. This will be cooler than your hot water heater setting. Whites and pastels Durable garments Heavy soils Warm Some cold water will be added, so this may be cooler than what your previous washer provided. Bright colors Moderate to light soils Cold Warm water may be added to assist in soil removal and to help dissolve detergents. Dark colors that bleed or fade Light soils 10