Whirlpool WVU37UC0F Use & Care Guide - Page 9

Style 1 - Cut Openings for 3¼" x 10" (8.3 cm x 25.4 cm) Rectangular Vent System Roof Venting To make a 4¹⁄4" x 10½" (10.8 cm x 26.7 cm) rectangular cutout on the underside of cabinet top and bottom: 1. Mark lines ¹⁄2" (1.3 cm) and 4³⁄4" (12.1 cm) from the back wall on the centerline of the underside of cabinet. 2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet. 3. Use saber or keyhole saw to cut a rectangular opening for vent. 4. Repeat steps 1-3 for the underside of the top of the cabinet. Cabinet cutouts A B A B *From wall, not cabinet frame A. 1/2" (1.3 cm)* B. 43/4" (12.1 cm)* To make a circular vent opening on the underside of the cabinet top: 1. Mark a centerline on the underside of the top of cabinet. 2. Mark a line 5" (12.7 cm) from the back wall on the underside of the top of cabinet. 3. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0.64 cm) larger than the vent. 4. Use saber or keyhole saw to cut the circular vent opening. Circular vent opening *From wall, not cabinet frame A. 1/2" (1.3 cm)* B. 43/4" (12.1 cm)* Wall Venting To make a 3½" x 10½" (8.9 cm x 26.7 cm) rectangle in the wall: 1. Make 2 lines by measuring ³⁄8" (0.9 cm) and 37⁄8" (9.8 cm) down from underside of cabinet and mark on the centerline on the back wall. 2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the wall. 3. Use saber or keyhole saw to cut a rectangular opening in the wall for the vent. Cabinet front Centerline ⅜" (0.9 cm) 3⅞" (9.8 cm) 5¼" 5¼" (13.3 cm) (13.3 cm) Style 2 - Cut Openings for 3¼" x 10" (8.3 x 25.4 cm) Rectangular Vent to Round Vent Transition Roof Venting To make a 4¹⁄4" x 10½" (10.8 cm x 26.7 cm) rectangular cutout on the underside of cabinet bottom: 1. Mark lines ¹⁄2" (1.3 cm) and 4³⁄4" (12.1 cm) from the back wall on the centerline of the underside of cabinet. 2. Mark lines 5¼" (13.3 cm) to the right and left of the centerline on the underside of cabinet. 3. Use saber or keyhole saw to cut a rectangular opening for vent. A Cabinet cutouts *From wall, not cabinet frame A. 5" (12.7 cm)* Style 3 - Cut Openings for 7" (17.8 cm) Round Vent To make a circular vent openings on the underside of the cabinet top and bottom: 1. Mark a centerline on the underside of the top of cabinet. 2. Mark a line 5" (12.7 cm) from the back wall on the underside of the top and bottom of cabinet. 3. Use a compass or a circle template to draw a circle with a diameter that is ¼" (0.64 cm) larger than the vent. 4. Use saber or keyhole saw to cut the circular vent opening. A *From wall, not cabinet frame A. 5" (12.7 cm)* 9