Whirlpool YGY397LXUS Installation Instructions - Page 8
Style 1: Power supply cord strain relief, Style 2: Direct wire strain relief - slide range
View all Whirlpool YGY397LXUS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4. Add strain relief. Style 1: Power supply cord strain relief ■ Assemble a UL listed strain relief in the opening. A ■ Lift range back panel up and off. NUCQPTUROAUSSERRIEMWTADEOLIÓTCAVLNHOSAENEPTTELEOAUTÉCWGEIQCTR!EATUUCRRRESAICTCEESAOLORD A. UL listed strain relief ■ Feed the power supply cord through the opening in the cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block. ■ Tighten strain relief screw against the power supply cord. ■ Use Phillips screwdriver to remove screws and slide cord/conduit plate down and out. Style 2: Direct wire strain relief ■ Use Phillips screwdriver to remove screws from panel on back of range. ■ Position cord/conduit plate as shown in the following illustration. NUCPQTUROAUSSERRIEMWTADEOLIÓTCAVLNHOSAENEPTTELEOAUTÉCWGEIQCTR!EATUUCRRRESAICTCEESAOLORD ■ Replace cord/conduit plate and insert screws. 8