Xbox XGX-00038 User Guide - Page 4

CONNECT TO YOUR TV AND AUDIO SYSTEM english IMPORTANT Stationary images in video games can "burn" into some TV screens, creating a permanent shadow. Consult your TV owner's manual or manufacturer before playing games. Connect the Composite AV Cable Use your composite AV cable to connect your console to your TV. To connect to your standard TV: 1 Connect the composite AV cable connector to the AV port on the console. 2 Connect the colour-coded connectors to the corresponding inputs on the SCART adapter and connect the SCART adapter to the TV: yellow to yellow (video), red to red (right audio), and white to white (left audio). You can also connect audio to a stereo receiver. For monaural (mono) TVs, which have only one audio input, connect either the right or left audio connector to the audio input. If your TV does not have a SCART connector, connect the colour-coded connectors to the corresponding inputs on the back of your TV. 3 Select the appropriate video input on your TV (see No Picture under "Troubleshooting" for further information). After you've set up your console, you can configure additional console audio settings and test your connection from the System area of the Xbox Dashboard. But before doing so, proceed through the steps in the following pages for connecting to power, connecting your controller, and other initial settings. Other AV Input You can also connect to additional TV input types by using the Xbox 360 Component HD AV cable, the Xbox 360 Advanced SCART AV Cable, the Xbox 360 VGA HD AV Cable, or the Xbox 360 HDMI AV Cable (all sold separately). For more information, go to www.xbox.com/ setup.