Xerox 2006NPC DocuColor 2006 Network Server Setup - Page 3

8. Setting up the network server Overview of IPX printing to the DocuColor 2006 Setting up the DocuColor 2006 is similar to setting up any other PostScript printer on the network. The following information is useful for experienced system administrators. The DocuColor 2006 with IPX connections has these characteristics: • NetWare 3.x, 4.x and 5.x are supported directly. NetWare 4.x is also supported through bindery emulation. • A minimum connection to the DocuColor 2006 consists of a NetWare file server, a NetWare print server, and a NetWare queue. • A single directory tree (for NetWare 4.x) and up to eight bindery servers can be configured simultaneously. This limit is the same for Ethernet or Token Ring configurations. • The DocuColor 2006 searches for print jobs on one NetWare print server per bindery server. • Each print server can store jobs for any print connection on the DocuColor 2006. • Windows 95/98 and Windows NT 4.0 workstations (whether a Novell server is present or not) can use IPX/SPX protocols for communicating with the printer directly or use Fiery utilities (ColorWise Pro Tools and Fiery Link). NetWare file servers support the creation of print queues, which are storage areas for print jobs. When a client on a remote workstation decides to print, the job is directed to a print queue on the NetWare file server and spooled to the NetWare server disk, freeing up the client workstation. The queues on the NetWare server must be named to match the Direct connection, Print queue, and Hold queue on the printer. The NetWare queue names should be given one of the following lower case extensions in English: _print _hold _direct Xerox DocuColor 2006 8-3