Xerox 2006NPC DocuColor 2006 Performing Setup from WebSetup - Page 15
Protocol2, Enable AppleTalk, have no defined zones or the network cable is
UPC - 042215475440
View all Xerox 2006NPC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
19. Performing the setup from WebSetup 6. If you have an AppleTalk network, select the Protocol2 tab from the Network Setup tabs. In this tab, you can specify the AppleTalk protocols used to send jobs to the printer. a. In the AppleTalk box, select the Enable AppleTalk check box. b. From the Select Zone drop down box, select the AppleTalk zone in which you want the printer to display. If there is only one zone, the printer is assigned to that zone automatically. If you cannot find an AppleTalk zone, your network may have no defined zones or the network cable is not connected. Xerox DocuColor 2006 19-15
19.
Performing the setup from WebSetup
Xerox DocuColor 2006
19–15
6.
If you have an AppleTalk network, select the
Protocol2
tab from
the Network Setup tabs. In this tab, you can specify the AppleTalk
protocols used to send jobs to the printer.
a.
In the AppleTalk box, select the
Enable AppleTalk
check
box.
b.
From the Select Zone drop down box, select the AppleTalk
zone in which you want the printer to display. If there is only
one zone, the printer is assigned to that zone automatically.
If you cannot find an AppleTalk zone, your network may
have no defined zones or the network cable is not
connected.