Xerox 3130 User Guide - Page 98
Solving General Printing Problems, Problem, Possible Cause, Solution - phaser toner cartridge
UPC - 095205611984
View all Xerox 3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Solving General Printing Problems Problem For problems with the operation of your printer, refer to the table for suggested solutions. Possible Cause Solution The Printer does not print The printer is not receiving power. Check the power cord connections. Check the power switch and the power source. The printer is not selected as the default printer. Select Xerox Phaser 3130 PCL 6 in the Printer folder in Windows as your default printer. Check the printer for the following: • The printer cover is not closed. • Paper is jammed. • No paper is loaded. • The toner cartridge is not installed. If a printer system error occurs, contact your service representative. The printer may be in Add paper to the manual feeder and Manual Feed mode. press the button on the printer's 6 control panel to begin printing. The connection cable between the computer and the printer is not connected properly. Disconnect the printer cable and reconnect it. The connection cable between the computer and the printer is defective. If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different printer cable. The port setting is incorrect. Check the Windows printer setting to make sure that the print job is sent to the correct port (for example, LTP1). If the computer has more than one port, make sure that the printer is attached to the correct one. The printer may be Check the printer properties to ensure configured incorrectly. that all print settings are correct. SOLVING PROBLEMS 6.3