Xerox 3450D Service Manual - Page 87
Registration and Skew, Skips or Smears
UPC - 095205120028
View all Xerox 3450D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Registration and Skew Fold the paper from two consecutive test prints in half (first side edge to side edge and then top edge to bottom edge). Observe the fold lines with reference to the crosshairs of the printed target. The fold line should be aligned perpendicular to the target crosshairs and should be within ±2.0 mm of the target crosshairs (each line on the target is 1.0 mm). If the image does not meet the criteria refer to Skewed Image on page 5-10. Skips or Smears Check the test print in the indicated areas for loss, stretching, or distortion of the image in bands across the process direction that make the image seem distorted, blurred, or compressed. If these faults are observed refer to Skips/Smears on page 5-10. 5-6 Phaser 3450 Laser Printer Service Manual