Xerox 3600B Phaser 3600 Machine Firmware Installation Instructions USB Install - Page 1
Xerox 3600B - Phaser B/W Laser Printer Manual
 |
UPC - 095205742640
View all Xerox 3600B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
How to upgrade by using the firmware upgrade utility 1. Connect USB cable to both the printer and PC. 2. Download the firmware file (w/bundled extraction utility) from Xerox support web site to your PC. 3. Double-click the upgrade utility (*.exe) and then the following message appears. Note: Only USB upgrades are supported with this tool, not Network. Use CentreWare IS for network upgrades. 4. Select Local(USB) and Click F/W Update. 5. Machine LCD will Display "FLASH UPGRADE..." message for about 1 minute. 6. Machine LCD will then Display below message for about 5 minutes. Update Image Please Wait... 7. Select OK on screen to close this window. Wait till machine reboots automatically.
-
1
 |
 |
How to upgrade by using the firmware upgrade utility
1.
Connect USB cable to both the printer and PC.
2.
Download the firmware file (w/bundled extraction utility) from Xerox support web site to
your PC.
3.
Double-click the upgrade utility (*.exe) and then the following message appears.
Note:
Only USB upgrades are supported with this tool, not Network. Use CentreWare IS
for network upgrades.
4.
Select
Local(USB)
and Click
F/W Update
.
5.
Machine LCD will Display "FLASH UPGRADE..." message for about 1 minute.
6.
Machine LCD will then Display below message for about 5 minutes.
Update Image
Please Wait...
7.
Select OK on screen to close this window. Wait till machine reboots automatically.