Xerox 6360DN Statement of Volatility

Xerox 6360DN - Phaser Color Laser Printer Manual

Xerox 6360DN manual content summary:

  • Xerox 6360DN | Statement of Volatility - Page 1
    data. However, the printer will not function properly without a replaced configuration card. The table on the next page lists the corresponding memory types for the Xerox Phaser 6360 printers. Please note there are no remnants of customer image data retained in the printer when both the (i) hard
  • Xerox 6360DN | Statement of Volatility - Page 2
    EEPROM Configuration Card Flash / ROM Hard Disk Volatile Yes1 Non-Volatile No2 Non-Volatile No2 Non-Volatile No3 Non-volatile Yes4 Notes: 1 SDRAM memory can be upgraded to 1024MB for all models 2 Contains printer configuration and operational parameters. It does not contain user image
  • 1
  • 2

Xerox Corporation
Office Printing Business, MS 7060-630
26600 SW Parkway Avenue
Wilsonville, OR 97070
Date: March 5, 2007
Subject: Volatility statement for Phaser 6360 color printer
The Phaser 6360 printer does not retain any latent user image in the mechanical system of the
printer during normal operation.
If a print job is disrupted prior to completion, a latent image
may exist in the mechanical system of the printer.
The image may be removed by clearing a
paper jam (resulting from the disruption), cycling power or printing a new page.
No user image data is maintained in the print controller or associated RAM following the
cycling of power.
The Phaser 6360 printer contains non-volatile flash memory on the controller board.
This
memory does not retain any variable printing data, but is used to retain firmware. No user
image data is retained in this memory.
The Phaser 6360 printer equipped with a hard disk drive will retain latent images in the hard
disk only when the job retention features are enabled/utilized such as Secure Print, Proof
Print, Saved Print, etc.
A procedure for securely erasing any hard disk data is available in a separate document titled
“Internal Hard Disk File Security”.
The Phaser 6360 printer contains non-volatile memory in the form of a configuration card.
This card does not retain any image data, but does retain printer configuration details.
This
configuration card can be removed and/or destroyed to eliminate the stored data. However,
the printer will not function properly without a replaced configuration card.
The table on the next page lists the corresponding memory types for the Xerox Phaser 6360
printers. Please note there are no remnants of customer image data retained in the printer
when both the (i) hard disk drive is removed (from printers with hard drives) and (ii) the
power is cycled.