Xerox 7400DT User Guide - Page 26
Manually Setting the Printer’s IP Address, Printer Setup, Connection Setup, Network Setup - dn
UPC - 095205676693
View all Xerox 7400DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Configuring the Network Address Manually Setting the Printer's IP Address Note: Verify that your computer has a properly configured IP address for your network. Contact your network administrator for more information. If you are on a network without a DNS server, or in an environment where the network administrator assigns printer IP addresses, you can use this method to manually set the IP address. Manually setting the IP address overrides DHCP and AutoIP. Alternatively, if you are in a small office with a single PC and use a dialup modem connection, you can manually set the IP address. 1. On the control panel, select Printer Setup, and then press the OK button. 2. Select Connection Setup, and then press the OK button. 3. Select Network Setup, and then press the OK button. 4. Select TCP/IP Setup, and then press the OK button. 5. Select DHCP/BOOTP, and then press the OK button to select Off. 6. Select TCP/IP Address, and then press the OK button. 7. Enter the printer's IP address, and then press the OK button. Phaser® 7400 Color Printer 2-8