Xerox P8EX Spire CXP8000 Color Server Release Notes - Page 20
Choosing a System Disk for Operations, Creo Spot Colors XT Version 2.3.1, Deactivating OPI
UPC - 095205085853
View all Xerox P8EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
13 Choosing a System Disk for Operations Do not perform any operations, such as archiving, on disk C. Perform these operations on disk D. Creo Spot Colors XT Version 2.3.1 It is recommended not to work with Creo Spot Colors XT version 2.3.1XTension when you use QuarkXPress. Deactivating OPI When you use Creo APR in the Spire CXP8000 color server make sure that the OPI XTension in QuarkXPress is not active. Alternatively, in the Settings window > Preferences > General Defaults, clear the Enable OPI Spire Support check box. Printing an Area of 12 × 18 inches Use paper that is 12.6 × 19.2 inches to print a full print area of 12 × 18 inches. Web Viewer To connect to the Spire CXP8000 color server from a Macintosh client workstation, use the Spire CXP8000 color server IP address. You can obtain the IP address from the Spire CXP8000 by clicking on the DFE Monitor > Network tab. The Web Viewer runs only on Explorer 5.0 browsers and higher and is suitable for both Macintosh and Windows platforms. Spire DC8000_COM Destination Profile If a job that contains shades of blue does not print to your satisfaction-for example, the blue shades appear too purple-use the predefined SpireDC8000_COM destination profile, and then use the required emulation. 739-00031A-EN