Yamaha 305 DGX505/305 English Owners Manual - Page 75

Using SmartMedia™ Memory Reference Saving Data Three types of data are saved to one "User Data File" by this operation: user song, style file (style number 136), and registration memory data. When you save a user song the style file and registration memory are also saved automatically. 1 Make sure that a properly formatted Smart- Media card has been properly inserted into the instrument's card slot, and that the file control icon is showing in the MAIN display. If the icon is not showing change the Media Select setting to SmartMedia. 2 Press the [FILE CONTROL] button. 3 Use the CATEGORY [ ] and [ ] buttons to locate the User File Save item. A default file name will automatically be created. f r Cursor left Delete character Cursor right The dial selects characters ● To Overwrite an Existing File If you want to overwrite a file that already exists on the SmartMedia card, use the dial or the [+] and [-] buttons to select the file, then skip ahead to step 6. NOTE • Up to 100 user files can be saved to a single SmartMedia card. • If the SmartMedia card has been write-protected, an appropriate message will appear on the display and you will not be able to execute the operation. • If there is not enough capacity left on the card to save the data an appropriate message will appear on the display and you will not be able to save the data. Erase unwanted files from the card to make more memory available (page 77), or use a different card. • Refer to the "Messages" list on page 91 for other possible errors that might prevent you from completing the operation. 4 Press the [EXECUTE] button. A cursor will appear below the first character in the file name. 5 Change the file name as necessary. • The [-] button moves the cursor to the left, and the [0] button moves it to the right. • Use the dial to select a character for the current cursor location. • The [+] button deletes the character at the cursor location. Cursor 6 Press the [EXECUTE] button. The display prompts you for confirmation. You can cancel the save operation at this point by pressing the [-] button. 7 Press the [EXECUTE] button again, or the [+] button, and the save operation will begin. CAUTION • Once the save-in-progress message appears on the display the operation cannot be canceled. Never turn off the power or remove the SmartMedia card during this operation. 8 A message will appear on the display to inform you that the operation has finished. Press the [EXIT] button to return to the MAIN display. NOTE • If an existing filename is specified the display prompts you for confir- mation. Press [EXECUTE] or [+] if it is OK to overwrite the file, or [-] to cancel. • The amount of time it will take to perform the save operation will depend on the condition of the SmartMedia card. DGX-505/305 Owner's Manual 75