Yamaha 505 Owner's Manual - Page 111
CVP-509/505: Keyboard Stand Assembly
View all Yamaha 505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
3 CVP-509/505: Keyboard Stand Assembly CAUTION • Assemble the stand on a flat floor with ample space. • Be careful not to confuse parts, and be sure to install all parts in the correct direc- tion. Please assemble in accordance with the sequence given below. • Assembly should be carried out by at least two persons. • Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage. • Be sure to tighten up all screws upon completing assembly of each unit. • To disassemble, reverse the assembly sequence given below. Have a Phillips-head (+) screwdriver of the appropriate size ready. 2 With the key cover closed, lean A against the wall. 1 Spread a large soft cloth, such as a blanket on the floor in front of the wall. 2 Place A on the cloth with the keyboard side turned to the wall. CAUTION • Be careful not to pinch your fingers. • Do not lay the main unit upside-down on the floor. Place the protection pads under the keyboard. 10cm 10cm 1 Remove all parts from the box. Confirm that all parts shown in the illustration are provided. Main unit A CAUTION To prevent the key cover from accidentally opening during assembly, press down on the key cover, making sure that the sheet (shown) remains in place. Front leg (left) B Rear leg D Front leg (right) C 3 Raise A from the backside, and lean A against the wall with the keyboard side on the bottom. CAUTION • The top part of the music rest is not fixed. Support the music rest with your hand so that the music rest will not fall. • Do not place the main unit with the rear side facing down. Large soft cloth E Pedal box metal Pedal box F Rear legs metal cover G Bundled pedal cord inside AC power cord Assembly Parts 4 x 10 mm screws for the cover x 2 5 x 30 mm long screws x 4 Washers x 4 5 x 18 mm short screws x 10 4 x 20 mm thin screws x 3 Protective pads x 2 Protective pads CAUTION Please do not touch the speaker net. Doing so may damage the speaker inside. CVP-509/505: Keyboard Stand Assembly CVP-509/505/503/501 Owner's Manual 111