Yamaha AV-1 Owner's Manual - Page 53
SLEEP TIMER OPERATION, Using the timer and the sleep timer, at the same time
View all Yamaha AV-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
HOW TO USE THE BUILT-IN TIMER English ↑ ↑ ↑ SLEEP TIMER OPERATION POWER POWER PRO LOGIC D ENHANCED MON ROCK CONCERT V DISCO HALL S PUSH PHONES VIDEO 2 MEMORY AUTO/MAN'L PRESET/BAND DISPLAY TIME ADJ TIMER / HOUR / MIN REPEAT MINI COMPONENT SYSTEM AV-1 OPEN/CLOSE / CD This system can be turned into the standby mode automatically. 1 Play the desired sound source. 2 Press the SLEEP button. "SLEEP" appears on the display, and soon it is replaced by "2h00m". 3 Press the SLEEP button repeatedly until the desired sleep time appears on the display. The display will change as described below. [Time is displayed by the hour (h) and the minute (m).] 2h00m ↑ 1h30m 1h00m ↑ OFF SLEEP (Sleep timer is off.) 0h30m * The original display mode will resume about 4 seconds after the selection is made. * The SLEEP indicator will light up to indicate that the sleep timer is on. 4 The system will turn into the standby mode automatically when the selected sleep time passes. SLEEP POWER TUNER PRESET CD CENTER/REAR /DELAY C/R/D ON/OFF DSP TEST SLEEP LEVEL PROGRAM SUBWOOFER INPUT POWER AMP VOLUME To confirm the sleep time setting Press the SLEEP button once. "SLEEP" appears on the display, and soon it is replaced by the remaining time of the selected sleep time. To change the sleep time While the SLEEP indicator is illuminated, press the SLEEP button repeatedly until the desired time appears. To stop the sleep timer operation Press the POWER switch, or press the SLEEP button repeatedly until "OFF SLEEP" appears on the display. (The SLEEP indicator will go out.) Using the timer and the sleep timer at the same time 1 Prepare timer play. (See page 49 and 50.) * Do not turn this system into the standby mode after the timer setting is finished. 2 Press the SLEEP button and set the sleep time. When the sleep timer operation finishes, the timer begins functioning to turn the source on at the preset time. Note Do not make the timer time setting so that the timer will start during sleep timer operation. (Since sleep timer operation has priority, the timer will not operate.) E-51