Yamaha AX-380 Owner's Manual - Page 6
Operations, To Play A Source
View all Yamaha AX-380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
OPERATIONS 3 2 1, 6 4 TO PLAY A SOURCE 1 VOLUME 7 5 Play the source. 6 VOLUME ∞ 0 - dB ∞ Set to the " " position. 2 POWER 3 Select a desired input source. MONITOR TAPE 2 TAPE 1 AUX INPUT TUNER CD PHONO COPY * The indicator corresponding to the selected input source will illuminate. * Note that pressing on each input selector button selects the source which is connected to the corresponding input terminals on the rear panel. 4 Select the speakers to be used. SPEAKERS A B ON ON OFF OFF * If you use two speaker systems, press both the A and B switches. ∞ 0 - dB Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 8.) Notes q If you select AUX, TUNER, CD or PHONO, be sure that TAPE 1 and/or TAPE 2 are not being selected. q If you select TAPE 1 and TAPE 2 at the same time, the result will be the sound from the tape deck 1. q For TAPE 1 and TAPE 2, whenever the button is pressed, the corresponding input source is selected or canceled alternately. 6