Yamaha AX-890 Owner's Manual - Page 6
Operations, To Play A Source - pure direct
View all Yamaha AX-890 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
OPERATIONS 2 7 1, 6 4 TO PLAY A SOURCE 1 VOLUME l8 l6 l4 20 l2 24 l0 28 8 34 6 40 4 50 3 60 2 70 l 0 -dB ∞ Set to the " " position. 2 Turn the power on. POWER 3 Select a desired input source. 73 4 Select the speakers to be used. SPEAKERS * If you use two speaker systems, press both the A and B switches. 5 Play the source. 6 VOLUME l8 l6 l4 20 l2 24 l0 28 8 34 6 40 4 50 3 60 70 2 l 0 -dB Adjust to the desired output level. 7 If desired, adjust the BASS, TREBLE, BALANCE and LOUDNESS controls, etc. (Refer to page 8-9.) * If you select turntable as an input source (PHONO position), you should confirm that the PHONO (MM/MC) switch is set to the position corresponding to the type of cartridge being used by the turntable. (Refer to page 9.) To turn off the power Press the POWER switch again. 6 CD DIRECT AMPLIFIER Setting the INPUT SELECTOR to the CD position automatically sends the signals from the CD player (connected to the CD input terminals on the rear of this unit) to the built-in CD DIRECT AMPLIFIER specially developed for CD sound directly. CD sound is reproduced purely and clearly by this signal routing.