Yamaha BD-S477 Owners Manual - Page 32

SETUP menu Playback Disc Auto Playback You can set Disc Auto Playback to on/off. When set to on, a disc will play back automatically after loading. On*, Off Angle Mark You can set to display the Angle Mark ( ) when Blu-ray Disc/DVD with multiple angles is played back. On*, Off PIP Mark You can set to display the PIP Mark ( ) when Blu-ray Disc with picture in picture (p. 23) is played back. On*, Off Secondary Audio Mark You can set to display the Secondary Audio Mark ( ) when Blu-ray Disc with secondary audio is played back. On*, Off Last Memory You can set whether this Player remembers the last playback position of a disc (Blu-ray or DVD video) when it is set to standby mode or the disc tray is opened. On*, Off Note - Some discs are not compatible with this function. Security Change Password You can set the password for changing the Parental Control Level and Country Code. Refer to "Parental Control" (p. 28) and "Country Code" (p. 28). Notes - The default password is 0000. - If you forget the password, refer to "Troubleshooting" (p. 35) and set all the Security settings to their default settings. Parental Control In some Blu-ray Discs/DVDs, a control level for disc viewing is set depending on the age of the viewer. You can set the Parental Control shown on the screen depending on the disc content. The password (see "Change Password" on p. 28) needs to be entered before the Parental Control Levels is set. After you set the Parental Control, when you play back a disc with level higher than current Parental Control Level, or you want to change the Parental Control Level, a dialog box will pop up to ask you to enter the password. Off*, 1-8 Country Code You can set the Country Code you live in. The password (see "Change Password" on p. 28) needs to be entered before the Country Code is set. This setting may be used for rating of Parental Control and disc playback. Network Connection Setting You can select a network connection method. Wired* Wireless Connects the network using Ethernet. Connects the network using a wireless LAN. You can select settings for a wireless LAN connection. Follow the on-screen instructions to proceed. Scan Searches for an access point. You can connect the access point that is found. Manual You can manually set information for an access point. Auto If your access point supports the WPS (Wi-Fi Protected Setup) function, you can use the auto setup method to connect this Player to the access point without entering information manually. Select PBC (Push Button Configuration) or PIN code method. Information You can display network information screen. On this screen, you can view the information of Interface (Ethernet), Address Type, IP Address, Subnet Mask, Default Gateway, and DNS. Connection Test You can perform an internet connection test. If the test is failed, please check "IP Setting" (p. 28) and perform the test again. IP Setting You can configure the network settings. Auto* Select to automatically configure the network settings of this Player with the DHCP server. Manual Select to configure the network settings (IP Address, Subnet Mask, Default Gateway, and DNS) manually. Hints - Numeric keys Enters characters. - 2/3 Moves the highlight. - CLEAR Deletes a character. - ENTER Saves the settings and exits from the menu. 28 En