Yamaha CDX-396 Owner's Manual - Page 16
Changing brightness of the display
View all Yamaha CDX-396 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Changing brightness of the display CDX-596 You can change the brightness of the display (or turn off the illumination) by pressing DIMMER. During play During a stop or a pause Normal illumination DIMMER Normal illumination Dim Dim (off)* * While the display illumination is off, the AUTO DISPLAY OFF indicator on the front panel lights up. AUTO DISPLAY OFF Dim* * The AUTO DISPLAY OFF indicator lights up. If a disc is played in this state, the display illumination will be turned off. CDX-496, CDX-396 If desired, you can change brightness of the display in three degrees by pressing DIMMER. DIMMER Normal illumination Slightly dim Dim Automatic spacing If you record a disc onto tape with an insufficient time space between tracks, the tape deck will not be able to perform blank search operations on the tape correctly. To prevent such a search mistake of the deck, press SPACE and light up "SPACE" on the display before recording. Spaces of about 4 seconds are inserted between the tracks. Note When the automatic spacing function is in effect, the display of the total time and of the total remaining time will include each of the 4 second intervals placed between tracks. To cancel the automatic spacing function Press SPACE. SPACE SPACE SPACE "SPACE" disappears from the display. Adjusting the level of signals output to the amplifier and the headphone listening level CDX-596 and CDX-496 only You can adjust the level of signals output to the amplifier by pressing - OUTPUT LEVEL +. - OUTPUT LEVEL + When you listen with headphones, connect the headphones to the PHONES jack and adjust the volume by pressing - OUTPUT LEVEL +. At that time, note that this adjustment will also vary the signal level output to the amplifier. PHONES PHONES E-12