Yamaha CLP-240 Owner's Manual - Page 68
After completing the assembly, please, check the following., Set the adjuster. - review
View all Yamaha CLP-240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
ENGLISH CLP-240/230: Keyboard Stand Assembly 7. Set the adjuster. Rotate the adjuster until it comes in firm contact with the floor surface. 8. Attach the headphone hanger. You can attach a headphone hanger on the Clavinova to hang the headphones. Install the headphone hanger using included two screws (4 x 10mm) as shown in the figure. After completing the assembly, please check the following. • Are there any parts left over? Review the assembly procedure and correct any errors. • Is the Clavinova clear of doors and other movable fixtures? Move the Clavinova to an appropriate location. • Does the Clavinova make a rattling noise when you shake it? Tighten all screws. • Does the pedal box rattle or give way when you step on the pedals? Turn the adjuster so that it is set firmly against the floor. • Are the pedal and power cords inserted securely into the sockets? Check the connection. • If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws. When moving the instrument after assembly, always hold the bottom of the main unit. CAUTION Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury. 68 CLP-240/230 Owner's Manual Hold here. Do not hold here.