Yamaha CLP-525 Midi Reference - Page 3

Program Change ON/OFF The information related to Voice changes is called "program change" in MIDI. Sending and receiving program change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer. (However, the Voice as played from the keyboard is maintained and does not change.) While holding down [DEMO/SONG] and [PIANO/VOICE], press the C♯6 key. Pressing the C♯6 key repeatedly toggles between Program Change On and Off. Cᅊ6 NOTE For information on program change numbers for the Voices of the instrument, refer to page 4. Default setting: ON Control Change ON/OFF Information related to non-note expressive changes, such as the use of a sustain pedal, is called "control change" in MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played from the instrument is maintained and does not change.) While holding down [DEMO/SONG] and [PIANO/VOICE], press the D6 key. Pressing the D6 key repeatedly toggles between Control Change On and Off. D6 NOTE For information on control changes that can be used with the instrument, refer to page 4. Default setting: ON 3 CLP-525 MIDI Reference