Yamaha CLS-200 Quick Connect Guide - Page 2

CLS-200 Quick-Connect Guide Introduction Yamaha developed the CLS-200 Home Theater Speaker package to turn your home into a theater. In addition to enhancing the sound of a video source, like your VCR, DVD player, or TV, the CLS-200 also superbly reproduces audio sources, such as a CD player or a cassette deck. This Quick-Connect Guide will help you get started. Study the system plan (Figure 1 below), and then use the wiring diagram (Figure 2 on opposite page) to connect the CLS-200 speakers to your A/V receiver. To properly attain the home theater experience, it should be equipped with Dolby® Digital, Dolby® Pro Logic, DTS, or comparable multi-channel surround-sound capability. For the video portion, you will need a DVD (or LD) player or a hi-fi stereo VCR and a television or monitor. Refer to the owner's manuals that came with your other components for complete instructions and cautions. Be sure to turn off all power when connecting the speakers. NOTE: Label the end of each speaker wire (i.e., left rear, right front, etc.) before connecting them to the A/V receiver. For wire runs over 30 feet, use larger 18- or 16-gauge speaker wire. Tools And Parts The CLS-200 Home Theater Speaker package consists of (5) 2-way NS-A200X speakers, (1) SW-5 powered subwoofer, 100' of speaker wire, and related speaker owner's manuals. For the installation, you will also need the following items: • Wire strippers (optional) • Toggle bolts, molly anchor screws, or sheet metal screws (for securing NS-A200X speakers to walls) NOTE: If you are unsure of how to securely and safely fasten speakers to a wall, please contact a reliable source about the best type of hanger for your particular wall's construction. Secure installation is the purchaser's responsibility. System Plan NS-A200X (left side, same height as TV) L SW-5 Subwoofer (on floor) C Sub NS-A200X (on top or below TV) NS-A200X (right side, same height as TV) R 6'~8' apart L = Left Channel R = Right Channel C = Center Channel S = Surround Channel Couch Listening Area S NS-A200X (on stand or wall, at least ear level or preferably higher) 8'~10' apart Figure 1. This overhead view shows a typical system layout for the CLS-200 Home Theater speaker package. 2 S NS-A200X (on stand or wall, at least ear level or preferably higher)