Yamaha Clavinova The Clavinova-computer Connection - Page 19
TO HOST connector, USB-MIDI driver
View all Yamaha Clavinova manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Terminology Serial cable Serial interface Serial port TO HOST connector USB USB cable USB connector USB-MIDI driver XG Description A serial cable connects to a serial port. A communication configuration that sends out data continuously in sequence. A serial cable is connected here. RS-232C, RS-422, and USB are all serial ports. This connector can be directly connected to a computer via a cable. The Clavinova, which has a TO HOST connector, has a built-in MIDI interface. Universal Serial Bus. This is a serial interface that enables you to connect a computer to peripheral devices. It allows much faster data transfer rate (12Mbps) compared to conventional serial ports. You can also connect to and disconnect from peripheral devices (hot swap) while the power to the computer is on. A USB cable is a cable that connects the USB port of the computer to the USB connector of an electronic musical instrument, or a USB interface to the USB port of computer. This connector can be directly connected to a computer via a cable. The Clavinova, which has a USB connector, has a built-in MIDI interface. A USB-MIDI driver is computer software that allows the computer to recognize and process MIDI signals. When you connect the computer's USB port to the Clavinova's [USB] connector, you must install the driver in the computer. XG is a new Yamaha MIDI specification which significantly expands and improves on the "GM System Level 1" standard with greater voice handling capacity, expressive control, and effect capability while retaining full compatibility with GM. The tone generators and music data disks that support this XG specification carry an "XG" mark. Previous page Table of Contents What is MIDI? Possibilities Connections 19 Glossary Software Next page