Yamaha DD-9 Owner's Manual - Page 10

Specifications, Troubleshooting - dd 9 digital percussion

Page 10 highlights

Troubleshooting Specifications In many cases, seemingly big problems or malfunctions can be remedied easily. Please check the following list before deciding that your DD-9 is broken. If the problem is not listed here or the suggested remedy is ineffective, take the DD-9 to an authorized Yamaha dealer for proper diagnosis and repairs. Do not attempt to repair this digital percussion instrument as serious damage may occur. A buzz or click occurs momentarily when the DD-9 is turned ON or OFF. ❏ This is a normal power surge noise that occurs when the POWER switch is operated. The LED display is completely dark. ❏ The batteries are low and should be replaced immediately. No sound comes from the speakers. ❏ The volume is turned down too low and should be adjusted up appropriately. ❏ A plug is inserted into the HEADPHONES/AUX. OUT jack and should be taken out immediately. The wrong voice plays when you strike a percussion pad. ❏ The desired voice has not been assigned to the percussion pad. Use the PAD ASSIGN function to program the desired voice to the appropriate percussion pad. The custom pad voice assignments have disappeared or defaulted. ❏ The batteries are low and should be replaced immediately. ❏ The POWER switch has been turned OFF and ON and the default voices have replaced the desired voices. Use the PAD ASSIGN function to program the desired voices again. When the percussion pads are struck, the LED display goes dark momentarily and then changes to the default reading "00". ❏ The batteries are low and should be replaced immediately. Percussion pads 4 (touch sensitive) SE pads 4 Percussion sets 9 preset + 1 custom Auto Rhythm Styles 100 Instrument and Sound Effect Voices 55 Auxiliary Functions Tap Start, Auto Roll, Auto Rhythm Style, Demonstration Song Panel Controls POWER switch, SELECTOR dial, VOLUME buttons, STYLE button, PERC. SET button, TEMPO button, TAP START button, PAD ASSIGN buttons, START/STOP button, AUTO/ ROLL button, SE SELECT button, DEMO button LED Display STYLE/PERCUSSION SET/ TEMPO and other settings Connectors DC IN 10-12V Headphones/AUX.OUT Main amplifier 3.8W (EIAJ) Speaker 10.0cm Power Source AC power adaptor YAMAHA PA-1, PA-1B, or PA-3 (sold separately) Batteries Six "AA" size, SUM-3, R-6, or equivalent batteries (sold separately) Dimensions (W x D x H) 435mm x 236mm x 160mm (17 1/8" x 9 1/4" x 6 1/3") Weight 1.4 Kg (3 lbs., 1oz.) Supplied accessories Percussion Sticks Voice List * Specifications subject to change without notice. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

8
Specifications
In many cases, seemingly big problems or
malfunctions can be remedied easily. Please
check the following list before deciding that
your DD-9 is broken.
If the problem is not listed here or the suggested
remedy is ineffective, take the DD-9 to an
authorized Yamaha dealer for proper diagnosis
and repairs. Do not attempt to repair this digital
percussion instrument as serious damage may
occur.
A buzz or click occurs momentarily when the DD-9
is turned ON or OFF.
This is a normal power surge noise that occurs
when the POWER switch is operated.
The LED display is completely dark.
The batteries are low and should be replaced
immediately.
No sound comes from the speakers.
The volume is turned down too low and should be
adjusted up appropriately.
A plug is inserted into the HEADPHONES/AUX.
OUT jack and should be taken out immediately.
The wrong voice plays when you strike a percus-
sion pad.
The desired voice has not been assigned to the
percussion pad. Use the PAD ASSIGN function to
program the desired voice to the appropriate
percussion pad.
The custom pad voice assignments have disap-
peared or defaulted.
The batteries are low and should be replaced
immediately.
The POWER switch has been turned OFF and ON
and the default voices have replaced the desired
voices. Use the PAD ASSIGN function to program
the desired voices again.
When the percussion pads are struck, the LED
display goes dark momentarily and then changes
to the default reading “00”.
The batteries are low and should be replaced
immediately.
Percussion pads
4 (touch sensitive)
SE pads
4
Percussion sets
9 preset + 1 custom
Auto Rhythm Styles
100
Instrument
and Sound Effect Voices
55
Auxiliary Functions
Tap Start, Auto Roll, Auto
Rhythm Style, Demonstration
Song
Panel Controls
POWER switch, SELECTOR
dial, VOLUME buttons, STYLE
button, PERC. SET button,
TEMPO button, TAP START
button, PAD ASSIGN buttons,
START/STOP button, AUTO/
ROLL button, SE SELECT
button, DEMO button
LED Display
STYLE/PERCUSSION SET/
TEMPO and other settings
Connectors
DC IN 10-12V
Headphones/AUX.OUT
Main amplifier
3.8W (EIAJ)
Speaker
10.0cm
Power Source
AC power adaptor
YAMAHA PA-1, PA-1B, or PA-3
(sold separately)
Batteries
Six “AA” size, SUM-3, R-6, or
equivalent batteries
(sold separately)
Dimensions (W x D x H)
435mm x 236mm x 160mm
(17 1/8” x 9 1/4” x 6 1/3”)
Weight
1.4 Kg (3 lbs., 1oz.)
Supplied accessories
Percussion Sticks
Voice List
* Specifications subject to change without notice.
Troubleshooting