Yamaha DGX-500AD Owners Manual - Page 84
Channel Messages, System Messages, MIDI Terminals, sages transmit information such as Note ON/OFF - dgx 500 digital
UPC - 086792278162
View all Yamaha DGX-500AD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
MIDI Functions MIDI is an acronym that stands for Musical Instrument Digital Interface, which allows electronic musical instruments to communicate with each other, by sending and receiving compatible Note, Control Change, Program Change and various other types of MIDI data, or messages. The DGX-500/300 can control a MIDI device by transmitting note related data and various types of controller data. The DGX-500/300 can be controlled by the incoming MIDI messages which automatically determine tone generator mode, select MIDI channels, voices and effects, change parameter values and of course play the voices specified for the various parts. MIDI messages can be divided into two groups: Channel messages and System messages. Below is an explanation of the various types of MIDI messages which the DGX-500/300 can receive/transmit. G Channel Messages The DGX-500/300 is an electronic instrument that can handle 16 channels. This is usually expressed as "it can play 16 instruments at the same time." Channel messages transmit information such as Note ON/OFF, Program Change, for each of the 16 channels. Message Name Note ON/OFF Program Change Control Change DGX-500/300 Operation/Panel Setting Messages which are generated when the keyboard is played. Each message includes a specific note number which corresponds to the key which is pressed, plus a velocity value based on how hard the key is stuck. Voice number (along with corresponding bank select MSB/LSB settings, if necessary). Messages that are used to change some aspect of the sound (modulation, volume, pan, etc.). G System Messages This is data that is used in common by the entire MIDI system. System messages include messages like Exclusive Messages that transmit data unique to each instrument manufacturer and Realtime Messages that control the MIDI device. Message Name Exclusive Message Realtime Messages DGX-500/300 Operation/Panel Setting Reverb/chorus/DSP settings, etc. Start/stop operation The messages transmitted/received by the DGX-500/300 are shown in the MIDI Implementation Chart on page 102. MIDI Terminals In order to exchange MIDI data between multiple devices, each device must be connected by a cable. The MIDI terminals of the DGX-500/300 are located on the rear panel. MIDI IN MIDI OUT Receives MIDI data from another MIDI device. Transmits the DGX-500/300's keyboard information as MIDI data to another MIDI device. • Special MIDI cables (sold separately) must be used for connecting to MIDI devices. They can be bought at music stores, etc. • Never use MIDI cables longer than about 15 meters. Cables longer than this can pick up noise which can cause data errors. 84