Yamaha EMX5016CF Owner's Manual - Page 19

Reference, Front & Rear Panels, Controls on Each Channel - 16 input powered

Get Yamaha EMX5016CF PDF manuals and user guides
UPC - 086792856216
View all Yamaha EMX5016CF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Reference Reference Front & Rear Panels Controls on Each Channel Channels 1 to 8 (Monaural) Channels 9/10 to 15/16 (Stereo) 1 2 1 INPUT A and INPUT B Jacks (Channels 1 to 8) You can connect an input source to either jack. Be sure to set the [26 dB] switch 4 to match the type of device you are connecting. INPUT A: A balanced XLR-type microphone input jack (1:Ground; 2:Hot; 3:Cold). If you are connecting a condenser microphone, be sure to turn the PHANTOM switch c to its ON position. Cold (-) Ground Hot (+) INPUT B: A TRS phone-type balanced line input jack (T: hot, R: cold, S: ground). Accepts both balanced and unbalanced line input. R: Cold (-) S: Ground T: Hot (+) CAUTION When using phantom power, do not connect any devices other than condenser microphones to the XLR input jacks. Other devices may be damaged if connected to phantom power. This precaution does not apply to balanced dynamic microphones, however, as these will not be affected by phantom power. NOTE On any given channel, you may use either INPUT A or INPUT B, but not both. Please connect to only either of these jacks on each channel. 2 LINE/MIC Jacks (Channels 9/10 to 15/16) These jacks accept stereo inputs and mic inputs. Use these to connect up stereo output devices, such as stereo synthesizers and CD players, and microphones. LINE jacks: Unbalanced stereo inputs. Each channel pair have phone jacks and RCA pin jacks. MIC jack: XLR balanced mic-level input jack. If you are connecting a condenser microphone, be sure to turn the PHANTOM switch c to its ON position. CAUTION When using phantom power, do not connect any devices other than condenser microphones to the XLR input jacks. Other devices may be damaged if connected to phantom power. This precaution does not apply to balanced dynamic microphones, however, as these will not be affected by phantom power. NOTE If you wish, you may use the channel pair's LINE and MIC jacks together at the same time. But note that the levels cannot be adjusted independently. EMX5016CF Owner's Manual 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
EMX5016CF Owner
’
s Manual
19
Reference
Front & Rear Panels
Controls on Each Channel
1
INPUT A and INPUT B Jacks (Channels 1
to 8)
You can connect an input source to either jack. Be sure
to set the [26 dB] switch
4
to match the type of device
you are connecting.
INPUT A:
A balanced XLR-type microphone input
jack (1:Ground; 2:Hot; 3:Cold).
If you are connecting a condenser micro-
phone, be sure to turn the PHANTOM
switch
c
to its ON position.
INPUT B
:
A TRS phone-type balanced line input
jack (T: hot, R: cold, S: ground). Accepts
both balanced and unbalanced line input.
When using phantom power, do not connect any
devices other than condenser microphones to the
XLR input jacks. Other devices may be damaged if
connected to phantom power. This precaution does
not apply to balanced dynamic microphones, how-
ever, as these will not be affected by phantom power.
On any given channel, you may use either INPUT A
or INPUT B, but not both. Please connect to only
either of these jacks on each channel.
2
LINE/MIC Jacks (Channels 9/10 to 15/16)
These jacks accept stereo inputs and mic inputs. Use
these to connect up stereo output devices, such as ste-
reo synthesizers and CD players, and microphones.
LINE jacks:
Unbalanced stereo inputs. Each channel
pair have phone jacks and RCA pin
jacks.
MIC jack:
XLR balanced mic-level input jack. If
you are connecting a condenser micro-
phone, be sure to turn the PHANTOM
switch
c
to its ON position.
When using phantom power, do not connect any
devices other than condenser microphones to the
XLR input jacks. Other devices may be damaged if
connected to phantom power. This precaution does
not apply to balanced dynamic microphones, how-
ever, as these will not be affected by phantom power.
If you wish, you may use the channel pair’s LINE and
MIC jacks together at the same time. But note that the
levels cannot be adjusted independently.
1
2
Channels
9/10 to 15/16
(Stereo)
Channels
1 to 8
(Monaural)
Cold (
–
)
Ground
Hot (+)
R: Cold (
–
)
S: Ground
T: Hot (+)
CAUTION
NOTE
CAUTION
NOTE
Reference