Yamaha EMX660 Owner's Manual

Yamaha EMX660 Manual

Get Yamaha EMX660 PDF manuals and user guides View all Yamaha EMX660 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha EMX660 manual content summary:

  • Yamaha EMX660 | Owner's Manual - Page 1
    POWERED MIXER Owner's Manual EEEngine 1 HIGH 2 HIGH 3 HIGH 4 HIGH 5 HIGH 6 HIGH -15 +15 - 0 10 AUX IN 0 10 TAPE IN MAIN 0 10 MASTER POWER ON OFF PHANTOM 2AMPs 300W 300W 1 2 LIMITER MAIN BRIDGE MAIN MAIN MAIN MONITOR POWER AMP Hi-Z Hi-Z Hi-Z Hi-Z 1 LINE 2 1 INST 2
  • Yamaha EMX660 | Owner's Manual - Page 2
    for repair. Using the unit in this condition is a fire and electrical shock hazard. • Should this unit be dropped or the cabinet be damaged, turn the power switch off, remove the power plug from the AC outlet, and contact your dealer. If you continue using the unit without heeding this instruction
  • Yamaha EMX660 | Owner's Manual - Page 3
    Introduction 3 Introduction Thank you for purchasing the Yamaha EMX660 Powered Mixer. The EMX660 has the following features. In order to take full advantage of the EMX660 and enjoy long and trouble-free performance, please read this owner's manual carefully, and keep it in a safe place for future
  • Yamaha EMX660 | Owner's Manual - Page 4
    bus. The signal of the MONITOR bus is sent to the speakers connected to the POWER AMP 2 A/B jacks (only if the power amp select switch is in the MAIN-MONITOR position) and to the MONITOR jacks (input/output input is distorted, turn this switch on (the pressed-in position). EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 5
    bus signal, providing a maximum of ±12 dB of cut/boost for each frequency band. You can use these sliders to reduce the level of frequency bands at which feedback easily occurs. Frequency response is fl adjust the MASTER control (A) so that the 0 indicator lights occasionally. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 6
    becomes effective. • MAIN-MONITOR With this setting, the MAIN bus signal will be output from the POWER AMP 1 A/B jacks and the MONITOR bus signal is output from the POWER AMP 2 A/B jacks. Only the MASTER controls in the MAIN and MONITOR sections G, A are both effective. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 7
    This indicator will light when the power of the EMX660 is turned on. L PHANTOM switch This switch turns the phantom power supply on/ off for the Lo-Z input jacks of channels 1-4 and MIC input jacks of channels 5-6. Turn this switch off if you do not use it. Control panel 7 EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 8
    Lo-Z jacks can provide +15 V phantom power, allowing you to use condenser microphones. Both Hi-Z and Lo-Z are Yamaha FC5 foot switch can be connected to this jack. If a foot switch is connected to this jack, you can use your foot to switch the built-in digital effect on/off. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 9
    signals from the EMX660 to external devices. A stereo recording device such as a cassette deck, DAT or MD recorder can be connected to the REC OUT jacks, and a playback device such a power amp can be connected and +4 dB/10 kΩ for the MONITOR/MAIN jacks. Input/output panel 9 EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 10
    . Likewise, when using the POWER AMP 1 and/or POWER AMP 2 jacks, do not connect anything to the BRIDGE jack. 2 Power switch This switch turns the power of the EMX660 on/ off. Note: Before turning the EMX660 on/off, turn down the MASTER controls of the MONITOR and MAIN section. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 11
    AMP 2 SPEAKERS No connection BRIDGE B A POWER AMP 1 8Ω~16Ω 8Ω~16Ω Main/Monitor Speakers 8Ω~16Ω 8Ω~16Ω Main Speakers Bridge connection MAIN BRIDGE MAIN MAIN MAIN MONITOR BNoA connection POWER AMP 2 SPEAKERS BRIDGE BNoA connection POWER AMP 1 8Ω~16Ω Main Speaker EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 12
    processor and footswitch, which is used to turn on and off the built-in digital effects processor, connected to the EMX660, in practice, only one effects processor, internal or external, will be used at a time, so the footswitch is not required when using external effects. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 13
    used at the same time. 3 Turn the power on in the order of peripheral devices © EMX660. Note: When turning the power Use the MONI MASTER control to set the overall level of the monitor mix. Using the digital effect The EMX660 to apply the digital effect. 5 Use the MAIN/MONITOR section EFFECT RTN
  • Yamaha EMX660 | Owner's Manual - Page 14
    some ways in which the EMX660 can be used, and explains connections and operation. As a conference PA system/installed sound system Here is an example of using the EMX660 as a conference PA system or as an installed sound system. Main Speakers 1 HIGH Power AMP 1 A/B 2 HIGH 3 HIGH 4 HIGH 5 HIGH
  • Yamaha EMX660 | Owner's Manual - Page 15
    (YAMAHA FC5) switch, which is used to turn on and off the built-in digital effects processor, connected to the EMX660, in practice, only one effects processor, internal or external, will be used at a time, so the footswitch is not required when using external effects. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 16
    of the MAIN/MONITOR sections to adjust the overall volume and tone. Using an external effect 1 Raise the EFFECT controls for the channels to which the input of the external effect. 3 Use the MAIN section AUX IN control to adjust the level of the sound processed by the effect. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 17
    Troubleshooting 17 Troubleshooting The following table describes the possible malfunctions of this device, and the appropriate actions to be taken in each case. Problem Cause Action The POWER connections. The device may have malfunctioned. Please contact your dealer. EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 18
    65 dB residual output noise (POWER AMP OUT) -88 dB residual Power requirement Power consumption DIGITAL EFFECT MUTE : on/off USA and Canada Europe Other 120 V AC 60 Hz 230 V AC 50 Hz 240 V AC 50 Hz 250 W Dimensions (WxHxD) 497×275×275 mm Weight 17 kg • 0 dB=0.775 Vrms EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 19
    , 0 dBV=1 Vrms. s Output specifications Output connectors Actual source impedance POWER AMP OUT (1•2) (A, B) BRIDGE OUT MAIN OUT MONITOR OUT EFFECT OUT REC OUT /User Information specified in EN55103-1 and EN55103-2. Inrush Current: 56A Conformed Environment: E1, E2, E3 and E4 EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 20
    20 Specifications s Dimensions W:497 (45.5) H:275 259 168 (45.5) 45.5 380 45.5 16 57.5 150 (67.5) 487 D:275 Unitɿmm EMX660-Owner's Manual
  • Yamaha EMX660 | Owner's Manual - Page 21
    OUT [300W/4Ω] 1 B LIMITER INV 2 BRIDGE OUT 1 [600W/8Ω] MAIN BRIDGE MAIN/MAIN MAIN/MONITOR PA POWER AMP LIMITER 2 1 A 2 POWER AMP2 OUT [300W/4Ω] 1 B MONITOR OUT [+4dB] EFFECT OUT [+4dB] Block and Level diagram 21 EMX660-Owner's Manual +40dB +30dB +20dB +10dB 0dB -10dB -20dB
  • Yamaha EMX660 | Owner's Manual - Page 22
    V529000 R1 1 IP 24 NP Printed in Taiwan YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
EEEngine
HIGH
MID
LOW
MONI
EFFECT
LEVEL
HIGH
MID
LOW
MONI
EFFECT
LEVEL
HIGH
MID
LOW
MONI
EFFECT
LEVEL
HIGH
MID
LOW
MONI
EFFECT
LEVEL
2
2
3
3
4
4
5
5
6
6
INPUT
OUTPUT
MONITOR
MAIN
AUX IN
REC
OUT
TAPE
IN
EFFECT OUT
FOOT SW
1
2
1
1
2
2
1
2
LINE
Hi-Z
INST
MIC
MIC
Lo-Z
Hi-Z
Lo-Z
Hi-Z
Lo-Z
Hi-Z
Lo-Z
SEE REAR PANEL CAUTION
MONITOR
MASTER
EFFECT RTN
+6
+3
0
–5
–10
+12
•
6
•
0
•
6
•
–12
+12
•
6
•
0
•
6
•
–12
125
250
500
1k
2k
4k
8k
0
10
TAPE IN
0
10
0
10
MAIN
MASTER
TAPE IN
AUX IN
EFFECT RTN
+6
+3
0
–5
–10
+12
•
6
•
0
•
6
•
–12
+12
•
6
•
0
•
6
•
–12
125
250
500
1k
2k
4k
8k
0
10
0
10
0
10
0
10
HIGH
MID
LOW
MONI
EFFECT
LEVEL
1
1
–15
+15
–15
+15
–15
+15
0
10
0
10
0
10
–15
+15
–15
+15
–15
+15
0
10
0
10
0
10
–15
+15
–15
+15
–15
+15
0
10
0
10
0
10
–15
+15
–15
+15
–15
+15
0
10
0
10
0
10
–15
+15
–15
+15
–15
+15
0
10
0
10
0
10
–15
+15
–15
+15
–15
+15
0
10
0
10
0
10
DIGITAL
EFFECT
ON
VO. ECHO 1
VO. ECHO 2
VO. REV. 1
VO. REV. 2
HALL. 1
HALL. 2
ROOM
PLATE
HIGH
MID
LOW
MONI
EFFECT
LEVEL
PAD
PAD
PAD
PAD
POWER AMP
1
2
LIMITER
MAIN
BRIDGE
MAIN
MONITOR
MAIN
MAIN
2
A
MPs
300W
300W
POWER
ON
OFF
PHANTOM
EEEngine
POWERED MIXER
Owner’s Manual
E