Yamaha EZ-300 EZ-300 Owners Manual - Page 60

The Functions

Page 60 highlights

The Functions Reference The Functions settings provide access to a range of detailed instrument parameters such as Tuning, Split Point, Voices and Effects. 1 Press the [FUNCTION] button several times until the desired item appears. Each time the [FUNCTION] button is pressed, the Function number increases one by one. To decrease the Function number by one, simultaneously hold down the [FUNCTION] button and press the [-/NO] button briefly. Simply pressing only the [+/YES] or [-/NO] button does not change the Function number. 2 Set the value by using the number buttons [0]-[9], [+/YES], [-/NO]. Direct numeric entry. Current value Press several times as necessary Function name 00Transpos 001 Function number After a few seconds, the Function name may be replaced with the setting value depending on the selected Function. NOTE • When the Function settings display does not appear, press one of the [VOICE], [SONG] or [STYLE] buttons, and then press the [FUNCTION] button again. • The Function number does not appear in the display during Song, Style or Metronome playback. The beat value appears instead. • Decrement value by 1. • No • Off Press simultaneously to recall the default setting. • Increment value by 1. • Yes • On 3 To exit from the Function settings, press one of these buttons; [VOICE], [SONG] or [STYLE]. Function List Function Number Function name Overall 001 Transpose Display Transpos 002 Tuning Tuning Range/Settings -12-12 427.0Hz-453.0Hz 003 Split Point SplitPnt 036-096 (C1-C6) 004 Touch Response Main Voice (page 24) 005 Volume 006 Octave 007 Chorus Depth TouchRes M.Volume M.Octave M.Chorus 1 (Soft), 2 (Medium), 3 (Hard), 4 (Fixed) 000-127 -2 - +2 000-127 Default Value Descriptions 00 440.0Hz 54 (F#2) Determines the pitch of the instrument in semitone increments. Determines the fine tuning of the pitch of the entire instrument in approx. 0.2Hz increments. Determines the highest key for the Split Voice and sets the Split "point"-in other words, the key that separates the Split (lower) and Main (upper) Voices. This setting is applied to the Accompaniment Split Point setting (page 45). 2 (Medium) Refer to page 26. * Determines the volume of the keyboard performance when performing along with a Song or a Style. * Determines the octave range for the Main Voice. * Determines how much of the Main Voice's signal is sent to the Chorus effect. 60 EZ-300 Owner's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

EZ-300
Owner’s Manual
60
Reference
The Functions
The Functions settings provide access to a range of detailed instrument parameters
such as Tuning, Split Point, Voices and Effects.
1
Press the [FUNCTION] button several
times until the desired item appears.
Each time the [FUNCTION] button is pressed, the
Function number increases one by one. To
decrease the Function number by one, simulta-
neously hold down the [FUNCTION] button and
press the [-/NO] button briefly. Simply pressing
only the [+/YES] or [-/NO] button does not
change the Function number.
After a few seconds, the Function name may be
replaced with the setting value depending on the
selected Function.
2
Set the value by using the number but-
tons [0]–[9], [+/YES], [-/NO].
3
To exit from the Function settings, press
one of these buttons; [VOICE], [SONG]
or [STYLE].
Function List
• When the Function settings display does not appear,
press one of the [VOICE], [SONG] or [STYLE] buttons,
and then press the [FUNCTION] button again.
• The Function number does not appear in the display dur-
ing Song, Style or Metronome playback. The beat value
appears instead.
Transpos
00
001
Current value
Function number
Function name
Press several
times as
necessary
NOTE
Direct
numeric entry.
• Increment
value by 1.
• Yes
• On
Press simultaneously
to recall the default
setting.
• Decrement
value by 1.
• No
• Off
Function
Number
Function name
Display
Range/Settings
Default
Value
Descriptions
Overall
001
Transpose
Transpos
-12–12
00
Determines the pitch of the instrument in semitone increments.
002
Tuning
Tuning
427.0Hz–453.0Hz
440.0Hz
Determines the fine tuning of the pitch of the entire instrument in
approx. 0.2Hz increments.
003
Split Point
SplitPnt
036–096
(C1–C6)
54 (F
#
2)
Determines the highest key for the Split Voice and sets the Split
“point”—in other words, the key that separates the Split (lower)
and Main (upper) Voices. This setting is applied to the Accompa-
niment Split Point setting (page 45).
004
Touch Response
TouchRes
1 (Soft),
2 (Medium),
3 (Hard),
4 (Fixed)
2 (Medium)
Refer to page 26.
Main Voice (page 24)
005
Volume
M.Volume
000–127
*
Determines the volume of the keyboard performance when per-
forming along with a Song or a Style.
006
Octave
M.Octave
-2 – +2
*
Determines the octave range for the Main Voice.
007
Chorus Depth
M.Chorus
000–127
*
Determines how much of the Main Voice’s signal is sent to the
Chorus effect.