Yamaha FSW150 Service Manual - Page 10

YST-FSW150/ YST-FSW050 YST-FSW150/YST-FSW050 3. Removal of front panel ass'y * The front panel ass'y is fixed to the cabinet ass'y with dowels. As a flatblade screwdriver is used for removal, use special care not to cause damage to the cabinet ass'y. a. Remove 2 bushings. (Fig. 4) * Used bushing, once removed, cannot be reused. Be sure to use a new bushing in place of the removed used bushing. b. First, insert a flatblade screwdriver at 2 dowel positions and push up the front panel ass'y. (Fig. 4) c. Next, using the metalblade or the like, push the front panel ass'y upward until it comes off. (Fig. 4) Note: • • Removing the front panel ass'y with the flatblade screwdriver only without using the metalblade or the like may cause a damage to the front panel ass'y. When installing the front panel ass'y, apply quick-drying bond or the like to dowels and then fit them into dowel holes for secure installation. (The front panel ass'y will come off easily if its dowels are fitted into dowel holes without applying quick-drying bond or the like.) YST-FSW150 Flatblade screwdriver 44 44 44 44 B JH C 44 JH
ʣ D "44 JH 44 44 44 44 44 Bushing ϒογϡ Dowel μϘ Dowel μϘ Metalblade ϔϥ YST-FSW050 Flatblade screwdriver Front panel ass'y 44: Bushing ϒογϡ Dowel μϘ Dowel μϘ Metalblade ϔϥ Front panel ass'y 44: 10 Fig. 4