Yamaha HTR-5930 Owner's Manual - Page 32
Displaying information about the input, source, the remote control to select the desired input
View all Yamaha HTR-5930 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
PLAYBACK ■ Displaying information about the input source You can display the format, sampling frequency, channel and bit rate of the current input signal. 1 Press one of the input selector buttons on the remote control to select the desired input source. 2 Press AMP on the remote control and then press STRAIGHT to select "STRAIGHT". AMP STRAIGHT ENT. 3 Press u / d to display the following information about the input source. - ENTER + A-E/CAT. PRESET/CH FORMAT Signal format display. When this unit cannot detect a digital signal, it automatically switches to analog input. Display status: Analog, Digital, Dolby Digital, DTS, PCM, Unknown Digital Note "Unknown Digital" appears when this unit detects any undecodable digital signal. CHANNEL Number of source channels in the input signal (front/ surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as "3/2/LFE". SAMPLING Sampling frequency. Display status: 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, 96kHz BITRATE Bit rate. y When you are displaying information about the input source, this unit is in the "STRAIGHT" mode (see page 33). To turn back the sound field program on, press STRAIGHT again. 28