Yamaha HTR-6080BL MCXSP10 Manual

Yamaha HTR-6080BL - HTR 6080 AV Receiver Manual

Get Yamaha HTR-6080BL - HTR 6080 AV Receiver PDF manuals and user guides View all Yamaha HTR-6080BL manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha HTR-6080BL manual content summary:

  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 1
    U HTR-6080 AV Receiver OWNER'S MANUAL
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 2
    (servicing) instructions in the literature accompanying the appliance. 1 Read Instructions - All the safety and operating instructions home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 3
    SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 4
    fix this unit. Contact qualified Yamaha service personnel when any service is needed. The cabinet should . 17 Be sure to read the "Troubleshooting" section on common operating errors before concluding MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner's Manual
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 5
    Getting started 4 Quick start guide 5 PREPARATION Connections 11 Optimizing advanced setup 90 ADDITIONAL INFORMATION Troubleshooting 94 Resetting the system 101 Glossary Specifications 106 Index 107 APPENDIX (at the end of this manual) Front panel i Remote control ii List of remote control
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 6
    Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts. • The symbol " the corresponding reference page(s). We Want You Listening For A Lifetime Yamaha and the Electronic Industries Association's Consumer Electronics Group want you
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 7
    Yamaha SCENE control signal support component (some models only) working with the SCENE function Sound field programs ◆ Proprietary Yamaha capability ◆ Bi-amplification connection capability ◆ Sleep timer Check that you received all of the following parts. Remote control CODE SET TRANSMIT POWER
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 8
    GETTING STARTED Getting started ■ Installing batteries in the remote control 13 2 1 Take off the battery compartment cover. 2 Insert the two supplied batteries (AA, R6, UM-3) according to the polarity markings (+ and -) on the inside of the battery compartment. 3 Snap the battery compartment cover
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 9
    INTRODUCTION Quick start guide Quick start guide The following steps describe the easiest way to enjoy DVD movie playback in your home theater. Front right Video monitor speaker Front left speaker Subwoofer Surround right speaker Preparation: Check the items In these steps, you need the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 10
    Quick start guide Step 1: Set up your speakers Place your speakers in the room and connect them to this unit. GND L AUDIO MULTI cable to the SUBWOOFER PRE OUT jack of this unit and the input jack of the subwoofer. Subwoofer AV receiver 6 En Input jack Subwoofer cable SUBWOOFER PRE OUT jack
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 11
    OUT SURROUND R L SURROUND BACK/ BI-AMP R SINGLE L REMOTE OUT AC OUTLETS Quick start guide 2 Connect the video cable to the composite video output jack of your DVD player and DVD VIDEO jack of this unit. AV receiver DVD player Make sure that this unit and the DVD player are unplugged from
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 12
    guide FM antenna terminal of this unit are different depending on the models. Connecting the wire of the AM loop antenna Open the lever • Connecting a DVD player via analog multichannel audio connection ☞ P. 22 • Connecting a Yamaha iPod universal dock ☞ P. 23 • Using the REMOTE OUT jack ☞ P. 23 •
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 13
    guide is a Yamaha product the instruction manual of the DVD player for further information. Case B: "I want to watch a TV program..." Press ESCENE3 (or FSCENE3) to select "TV Viewing". Note To use the "TV Viewing" template (Case B), you must connect a satellite receiver, a cable TV receiver
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 14
    start guide to the standby mode and consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby parameters for your listening room (AUTO SETUP) ☞ P. 28 • Manually adjusting various parameters of this unit ☞ P. 71 • Setting the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 15
    (U.S.A. and Canada models only) Connect the XM MiniTuner Dock (sold separately). ☞ P. 53 DOCK terminal Connect a Yamaha iPod universal dock . ☞ P. 16 REMOTE OUT jacks Connect the remote control input jack of the Yamaha components. ☞ P. 23 Video jacks Connect the video cable plugs. ☞ P. 18
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 16
    to 1 m (1 to 3 ft) PL PR 1.8 m (6 ft) FL FR 1.8 m (6 ft) C Subwoofer (SW) The use of a subwoofer with a built-in amplifier, such as the Yamaha Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 17
    PREPARATION Connections Connecting speakers Be sure to connect the left channel (L), right channel (R), "+" (red) and "-" (black) properly. If the connections are faulty, this unit cannot reproduce the input sources accurately. Caution • Before connecting the speakers, make sure that this unit is
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 18
    allows you to make bi-amplification connections to one speaker system. Check if your speakers support biamplification. To make the bi-amplification connections, use the FRONT and SURROUND BACK/BI-AMP terminals into the terminals appropriately. Refer to the instruction manuals of the speakers for details.
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 19
    PREPARATION Information on jacks and cable plugs Audio jacks and cable plugs AUDIO L R DIGITAL COAXIAL DIGITAL OPTICAL Connections Video jacks and cable plugs VIDEO S VIDEO COMPONENT VIDEO Y PB PR (White) (Red) (Orange) (Yellow) (Green) (Blue) (Red) L R C O V S Y PB PR
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 20
    This unit is not compatible with HDCP-incompatible HDMI or DVI components. • You can check the potential problem about the HDMI connection (see page 41). HDMI HDMI cable plug y • We recommend that you use . Set "VIDEO CONV." to "ON" in "MANUAL SETUP" (see page 81) to activate this feature. 16 En
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 21
    PCM, Dolby Digital and DTS signals input at the HDMI IN 1 or HDMI IN 2 jack can be output at the HDMI OUT jack only when "SUPPORT AUDIO" is set to "OTHER" (see page 77). • Audio signals input at the HDMI IN jacks are not output at the AUDIO output and DIGITAL
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 22
    to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack of this unit. Use the "SUPPORT AUDIO" parameter in "SOUND MENU" to select the component to play back HDMI audio signals (see page 77). Note Some video monitors connected to this
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 23
    PREPARATION Connections Connecting other components Make sure that this unit and other components are unplugged from the AC wall outlets. Notes • When "VIDEO CONV." is set to "OFF" (see page 82), be sure to make the same type of video connections as those made for your TV (see page 18). For
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 24
    Y V SS V L R L R Video in V Video out V S S-video in S S-video out L R Audio in L R Audio out ■ Connecting a set-top box DVD recorder, PVR Satellite receiver, cable TV receiver or HDTV decoder DVD recorder, PVR or VCR S-video out Video out Component video out Audio out HDMI out Optical out
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 25
    PREPARATION ■ Connecting audio components Connections Notes • To make a digital connection to a component other than the default component assigned to each the DIGITAL INPUT jack or the DIGITAL OUTPUT jack, select the corresponding setting for "OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "I/O
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 26
    Connections ■ Connecting an external amplifier This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 27
    turn down the volume of this unit and other components before making connections. DOCK Yamaha iPod universal dock (such as the YDS-10, sold separately) Notes • The you use one of the SCENE buttons. Refer to the owner's manuals for details about the capability of the SCENE control signals of the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 28
    clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas. Indoor FM antenna (supplied) AM loop antenna (supplied) ANTENNA FM GND AM 75 UNBAL. Connecting the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 29
    /ON (or GSTANDBY) to set this unit to the standby mode. In the standby mode, this unit consumes a small amount of power in order to receive infrared signals from the remote control. y • You can also turn on this unit by pressing ESCENE (or FSCENE) buttons. • When you turn on this unit
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 30
    Lights up when headphones are connected and a sound field program is selected (see page 46). 6 DOCK indicator Lights up when you station your iPod in a Yamaha iPod universal dock (such as the YDS-10, sold separately) connected to the DOCK terminal of this unit (see page 23) and V-AUX is selected
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 31
    in "SOUND MENU" (see page 74) procedure. y • You can make settings for surround back speakers automatically by running "AUTO SETUP" (see page 28) or manually by adjusting settings for "SUR.B L/R SP" (see page 73) in "SOUND MENU". • To use the presence speakers, set "EXTRA SP ASSIGN" to "PRESENCE
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 32
    your listening room This unit employs the YPAO (Yamaha Parametric Room Acoustic Optimizer) technology which lets you the system menu that appears in the OSD or in the front panel display. This manual uses the OSD illustrations to explain the "AUTO SETUP" procedure. • Before performing operations,
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 33
    PREPARATION Optimizing the speaker setting for your listening room 4 Press Dl / h to select the desired setting 6 Press Dl / h to select the desired setting of for "EXTRA SP ASSIGN" and then press Dn. "EQ". Extra speaker assignment EXTRA SP ASSIGN Selects the function of the speakers connected
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 34
    procedure is canceled and an error screen appears. For details, see "If an error screen appears" on page 32. • When this unit detects potential problems during the "AUTO SETUP" procedure, "WARNING" and the number of warning messages appears in the above of "RESULT" (see page 32). • Depending on the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 35
    the "AUTO SETUP" results. 12 Press DENTER to confirm your selection. The top "SET MENU" display appears in the OSD. SET MENU . ;AUTO SETUP ;MANUAL SETUP .A;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter 13 Press NSET MENU to exit from "SET MENU". 14 Disconnect the optimizer microphone from this unit. The
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 36
    " procedure. ■ If "WARNING" appears When this unit detects potential problems during the "AUTO SETUP" procedure, "WARNING" appears in the "AUTO details about each warning message, see the "AUTO SETUP" section in "Troubleshooting" on page 99. • When the corresponding warning message is not applicable
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 37
    BASIC OPERATION SELECTING THE SCENE TEMPLATES Selecting the SCENE templates This unit is equipped with 18 preset SCENE templates for various situations of using this unit. As the initial factory setting, the following SCENE templates are assigned to each SCENE button: SCENE 1: DVD Viewing SCENE
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 38
    Satellite Radio programs, you need to connect the XM Mini-Tuner Dock (sold separately) and activate the service (see page 53). DOCK iPod Listening * To listening to the iPod, you need to connect a Yamaha iPod universal dock (sold separately) to this unit (see page 58). TV programs DTV/CBL TV
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 39
    SCENE template when you enjoy XM Satellite Radio programs. Select this SCENE template when you play back music on your iPod stationed in a Yamaha iPod universal dock. Select this SCENE template when you enjoy general programs on your TV. TV Sports Viewing DTV/CBL ENTERTAINMENT Select this SCENE
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 40
    Selecting the SCENE templates Creating your original SCENE templates You can create your original SCENE templates for each SCENE button. You can refer to the preset 18 SCENE templates to create the original SCENE templates. Select the desired SCENE template Create an original SCENE template
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 41
    noise that may damage your speakers. Check whether your CD player supports CDs encoded in DTS. Also, check the sound output level of instructions for the source component. • See page 50 for details about tuning instructions. • See page 54 for details about XM Satellite Radio tuning instructions
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 42
    Playback ■ A quick guide to contents When you want to... Enjoy pure hi-fi stereo sound Adjust the tonal quality of the front speakers Adjust the parameters of sound
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 43
    BASIC OPERATION Playback Selecting audio input jacks (AUDIO SELECT) This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source. y • We recommend that you set the audio
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 44
    selector to KAMP and then press NSET MENU on the remote control. The top "SET MENU" display appears in the OSD. SET MENU . ;AUTO SETUP ;MANUAL SETUP .A;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter 2 Press Dn repeatedly to select "SIGNAL INFO" and then press DENTER. The audio information about the input
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 45
    BASIC OPERATION ■ Audio information FORMAT SAMPLING CHANNEL BITRATE FLAG Signal format. When this unit cannot detect a digital signal, it automatically switches to analog input. The number of samples per second taken from a continuous signal to make a discrete signal. The number of source
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 46
    can use to enhance your playback experience. y • The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 47
    BASIC OPERATION ■ For audio music sources y For audio music sources, we also recommend that you use the Pure Direct mode (see page 48). Sound field programs Notes • The available sound field parameters differ depending on the settings of the speakers. • "DIALG.LIFT" is available only when "EXTRA
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 48
    Sound field programs ■ For various sources Notes • The available sound field parameters and the created sound fields differ depending on the input sources and the settings of this unit. • "DIALG.LIFT" is available only when "EXTRA SP ASSIGN" in "SPEAKER SET" is set to "PRESENCE" (see page 72).
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 49
    original acoustic positioning of multi-channel audio such as Dolby Digital and DTS. It has been designed with the concept of "an ideal movie theater", in which the audience is surrounded by beautiful reverberations from the left, right and rear. DSP LEVEL S. INIT. DLY S. ROOM SIZE S.LIVENESS SB
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 50
    Sound field programs ■ Stereo playback Note The available parameters differ depending on the input sources and the settings of this unit. STEREO 5 STEREO 2ch STEREO Use this program to mix down multi-channel sources to 2 channels. See page 49 for details. DIRECT STEREO 5 STEREO 7ch STEREO
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 51
    Before performing the following operation, set the operation mode selector on the remote control to KAMP. Enjoying unprocessed input sources (Straight decoding mode) When this unit is in the "STRAIGHT" mode, 2-channel stereo sources are output from only the front left and right speakers. Multi-
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 52
    USING AUDIO FEATURES Using audio features Before performing the following operations, set the operation mode selector on the remote control to KAMP. Enjoying pure hi-fi sound Use the Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When the Pure Direct mode is
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 53
    BASIC OPERATION Enjoying multi-channel sources in 2-channel stereo You can mix down multi-channel sources to 2 channels and enjoy playback in 2-channel stereo. Press PSTEREO on the remote control repeatedly to select "2ch Stereo". y • You can use a subwoofer with this program when "LFE/BASS OUT" is
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 54
    are strong and there is no interference. If the signal received from the station you want to select is weak, tune into it manually. 1 Rotate the HINPUT selector on the front panel to select "TUNER" as the input source. Note Manually tuning into an FM station automatically switches the tuner to
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 55
    station under the same preset station number. • If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops in each of the 5 preset station groups) manually. 1 Tune into a station. See page 50 for tuning instructions. 2 Press 6MEMORY on the front panel. The
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 56
    FM/AM tuning 4 Press 5PRESET/TUNING/CH l / h to select a preset station number (1 to 8) while the MEMORY indicator is flashing. • Press 5h to select a higher preset station number. • Press 5l to select a lower preset station number. Flashes 2 Press 5PRESET/TUNING/CH l / h on the front panel (or
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 57
    in a full surround sound experience. Note The XM Satellite Radio service is only available in the 48 contiguous United States (not available XM jack on the rear panel of this unit. For details, see the operating instructions provided with the XM Mini-Tuner Dock. XM Mini-Tuner and XM Dock (sold
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 58
    Dock to your XM Ready® home audio system, and installed the antenna, you are ready to subscribe and begin receiving XM programming. There are three does not use the letters "I", "O", "S" or "F". Activate your XM Satellite Radio service in the U.S. online at http://www.xmradio.com/ or call 1-800-XM-
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 59
    BASIC OPERATION XM Satellite Radio tuning Before performing the following operations, set the operation mode selector on the remote control to KSOURCE. ■ All Channel Search mode 1 Press 2SEARCH MODE (or NSRCH MODE) repeatedly to select "ALL CH SEARCH". 2 Press 5PRESET/TUNING/CH l / h (or DPRESET/
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 60
    XM Satellite Radio tuning Before performing the following operations, set the operation mode selector on the remote control to KSOURCE. Setting the XM Satellite Radio preset channels You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 61
    a status message or an error message appears in the front panel display or in the OSD, see the "XM Satellite Radio" section in "Troubleshooting" on page 94 for appropriate remedies. ■ Displaying the XM Satellite Radio information in the front panel display Press 7DISPLAY (or ODISPLAY) repeatedly to
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 62
    and iPod mini are supported. • Some features may not be compatible depending on the model or the software version in the OSD, see the "iPod" section in "Troubleshooting" on page 99. • Once the connection between your when your iPod is stationed in a Yamaha iPod universal dock connected to the DOCK
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 63
    BASIC OPERATION 1 Set the operation mode selector to KSOURCE and then press ODISPLAY on the remote control. The following display appears in the OSD. iPod Top Playlists > Artists > Albums > Songs > Genres > Composers > Settings > 2 Press Dk / n / l / h to navigate the iPod menu and
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 64
    adjustments need to be made. To play DTS-encoded DVDs and CDs (when using a digital audio connection) on your DTS-compatible player, follow its operating instructions to make a setting so that the analog signal will be output from the player. Notes • When this unit is set to the standby mode, you
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 65
    ADVANCED SOUND CONFIGURATIONS Advanced sound configurations Changing sound field parameter settings You can enjoy good quality sound with the initial factory settings. Although you do not have to change the initial factory settings, you can change some of the parameters to better suit the input
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 66
    Advanced sound configurations ■ Basic configuration of sound field programs Each sound field program has some parameters defining the characteristics of the program. To customize the selected sound field program, adjust "DSP LEVEL" and/ or "DIALG.LIFT" first, and then try other parameters. y To
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 67
    ■ Sound field parameters for the advanced configurations Use the following sound field parameters to customize sound field programs in detail. y To change sound field parameter settings, see page 61 for details. Advanced sound configurations Sound field parameter INIT.DLY P.INIT.DLY S.INIT.DLY SB
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 68
    Advanced sound configurations Sound field parameter ROOM SIZE P.ROOM SIZE S.ROOM SIZE SB ROOM SIZE Features Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the surround sound field. The larger the value, the larger the surround sound field becomes. As the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 69
    Sound field parameter REV.TIME Advanced sound configurations Features Reverberation time. Adjusts the amount of time taken for the dense, subsequent reverberation sound to decay by 60 dB at 1 kHz. This changes the apparent size of the acoustic environment over an extremely wide range. Set a longer
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 70
    Advanced sound configurations Sound field parameter 2ch Stereo DIRECT 7ch Stereo CT LEVEL SL LEVEL SR LEVEL SB LEVEL PL LEVEL PR LEVEL 2ch Enhancer 7ch Enhancer Features 2-channel stereo direct. Bypasses the decoders and the DSP processors of this unit for pure hi-fi stereo sound when playing 2-
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 71
    Cinema SUR.DECODE 9 SURROUND DECODE Neo:6 Music DTS processing for music sources. C. IMAGE SUR.DECODE 9 SURROUND DECODE Neural Sur. (U.S.A. and Canada models only) Neural Surround processing for any sources. The Neural Surround decoder is compatible with PCM signals (32 kHz, 44.1 kHz, 48 kHz
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 72
    Advanced sound configurations Decoder parameter descriptions Decoder parameter Features PLIIx Music PLII Music PANORAMA Pro Logic IIx Music and Pro Logic II Music panorama. Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect. Choices: OFF, ON
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 73
    of the decoders for the 6.1/7.1-channel playback. Page 72 74 75 75 76 76 76 77 77 Input menu 2 INPUT MENU Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source. Parameter Features A)I/O ASSIGNMENT Assigns the input/output jacks of this unit
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 74
    ) Option menu 3 OPTION MENU Use this menu to manually adjust the optional system parameters. Parameter A)DISPLAY SET B)MEMORY GUARD C)AUDIO SELECT D)PARAM.INI E)XM RADIO SET F)DOCK SET Features Adjusts the brightness of the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 75
    SETUP .A;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter 2 Press Dk / n to select "MANUAL SETUP" and then DENTER to enter "MANUAL SETUP". The "MANUAL SETUP" display appears in the OSD. MANUAL SETUP . 1 SOUND MENU 2 INPUT MENU 3 OPTION MENU [ ]/[ ]:Up/Down [ENTER]:Enter 3 Press Dk / n repeatedly and
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 76
    . F)DYNAMIC RANGE G)AUDIO SET H)HDMI SET I)EXTD SUR. [ ]/[ ]:Up/Down [ENTER]:Enter ■ Speaker settings A)SPEAKER SET Use this feature to manually adjust any speaker settings. SOUND MENU . EXTRA SP ASSIGN >FRONT B PRESENCE NONE FRONT B;;;;FRONT PRIORITY;;;;;--ZONE2 SET Not Available Extra speakers
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 77
    Customizing this unit (MANUAL SETUP) Woofer section of a speaker is 16 cm (6.5 in) or larger: large Woofer section of a speaker is smaller than 16 cm (6.5 in): small Front speakers
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 78
    to reverse the phase of your subwoofer. • Select "REVERSE" to reverse the phase of your subwoofer. ■ Speaker level B)SPEAKER LEVEL Use this feature to manually adjust the output level of each speaker. Control range: -10.0 to 10.0 dB Control step: 0.5 dB Initial setting: 0.0 dB SOUND MENU B)SPEAKER
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 79
    manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home : [U.S.A. and Canada models]: feet (ft) [Other models]: meters (m) • Select
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 80
    Customizing this unit (MANUAL SETUP) Center graphic equalizer CENTER GEQ Use to match the tonal quality of the center speaker with that of the front left and right speakers.
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 81
    audio signals. SOUND MENU H)HDMI SET SUPPORT AUDIO: HTR-6080 [p]/[[]:Select [ENTER]:Return Support audio SUPPORT AUDIO Use this feature to select output at the HDMI OUT jack of this unit. p Customizing this unit (MANUAL SETUP) ■ Extended surround decoders I)EXTD SUR. Use this feature to enjoy
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 82
    be reset to "AUTO". p p 2 INPUT MENU Use this menu to reassign the input/output jacks, select the input mode or rename the input source. MANUAL SETUP 2 INPUT MENU . A)I/O ASSIGNMENT B)INPUT RENAME C)VOLUME TRIM D)DECODER MODE E)MULTI CH SET [ ]/[ ]:Up/Down [ENTER]:Enter ■ Input/output assignment
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 83
    V-AUX, VCR, DVR INPUT MENU OPTICAL OUT . (1);;;;;MD/CD-R (MD/CD-R ) Customizing this unit (MANUAL SETUP) For HDMI IN jacks 1 and 2 HDMI IN Choices: [IN1] DVD, DTV/CBL, V-AUX, • You can only rename DOCK when iPod is stationed in the Yamaha Universal Dock connected to this unit. 1 Press one of the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 84
    Customizing this unit (MANUAL SETUP) ■ Volume Trim C)VOLUME TRIM Use this feature [ ]/[[]:Adjust [RETURN]:Exit y • You can adjust the value for DOCK only when iPod is stationed to the Yamaha Universal Dock connected to this unit. • The default name ("DVD" in the display example above) and the new
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 85
    signals even if you set "VIDEO CONV." to "ON". Customizing this unit (MANUAL SETUP) HDMI Up-scaling HDMI Up-Scaling Use this feature to select the resolution signals. The resolution availability ("480p" or "576p") depending on the model. However, when the video monitor is connected to this unit via
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 86
    [ p p Customizing this unit (MANUAL SETUP) HDMI aspect ratio HDMI ASP Use this feature to adjust the aspect ratio for video signals output at the HDMI OUT jack. OPTION MENU A)
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 87
    input sources when you turn on the power of this unit. Choices: AUTO, LAST OPTION MENU C)AUDIO SELECT >AUTO LAST Customizing this unit (MANUAL SETUP) ■ Parameter initialization D)PARAM.INI Use this feature to initialize the parameters of each sound field program within a sound field program group
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 88
    [ Customizing this unit (MANUAL SETUP) ■ XM Radio setting E)XM RADIO SET OPTION MENU F)XM RADIO SET XM ANTENNA;;;95% [ENTER]:Return XM Radio antenna XM ANTENNA Use this feature
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 89
    REMOTE CONTROL FEATURES Remote control features In addition to controlling this unit, the remote control can also operate other audiovisual components made by Yamaha and other manufacturers. To control your TV or other components, you must set up the appropriate remote control code for each input
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 90
    Remote control features Controlling this unit, a TV, or other components ■ Controlling this unit Set the operation mode selector to KAMP to control this unit. ■ Controlling a TV Set the operation mode selector to KTV to control your TV. To control your TV, you must set the appropriate remote
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 91
    Remote control features ■ Controlling other components Set the operation mode selector to KSOURCE to control other components selected with the input selector buttons. You must set the appropriate remote control code for each input source in advance (see page 88). The following table shows the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 92
    at the end of this manual. Remote control code default settings Input source Component category Manufacturer Default code CD CD YAMAHA 62000 MD/CD-R CD-R YAMAHA 71292 DVD DVD YAMAHA 42000 DTV/CBL - - - TUNER TUNER YAMAHA 82005 XM TUNER YAMAHA 82006 V-AUX DVR OTHER AUDIO
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 93
    Resetting all remote control codes Use this feature to clear all the remote control codes previously set and reset all of them to the initial factory settings. 1 Press UCODE SET using a ballpoint pen or a similar object. The VTRANSMIT indicator on the remote control flashes twice. CODE SET
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 94
    ADVANCED SETUP Advanced setup This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 95
    This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately. Choices: ID1, ID2 • The impedance of each speaker must be 6 Ω or higher. * The Canada model cannot use two separate speaker systems (A and B) simultaneously when "SP IMP."
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 96
    Advanced setup See page 90 for the operation of the advanced setup. ■ Remote control TUNER ID REMOTE TUN Use this feature to set the TUNER ID of this unit for remote control recognition. Choices: ID1, ID2 • Select "ID1" when the remote control TUNER ID code is set to "82005". • Select "ID2" when the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 97
    OFF" when the component connected to the REMOTE OUT jack is not the Yamaha component and does not have the capability of the SCENE control signals. Note this unit. When this parameter is set to "YES", this unit receives the information of the available video signal resolutions from the video monitor
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 98
    Troubleshooting Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized Yamaha dealer or service
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 99
    Troubleshooting Problem The sound suddenly goes off. Sound is heard from the speaker remote control to resume audio output. Incorrect cable connections. Connect the cables properly. If the problem persists, the cables may be defective. Incorrect settings in "SPEAKER LEVEL". Adjust the "SPEAKER
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 100
    Troubleshooting Problem Cause Remedy No sound is heard from the subwoofer. "LFE/BASS OUT" in . Audio input jack select is set to "ANALOG". Make an appropriate setting following the operating instructions for your component. Set Audio input jack select to "AUTO". A humming sound is Incorrect
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 101
    Troubleshooting Problem Cause Remedy "CHECK SP WIRES" appears in the front panel display. again. Tighten the AM loop antenna connections and orient the antenna for the best reception. Use the manual tuning method. Use an outdoor antenna and a ground wire. This will help somewhat, but it is
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 102
    Troubleshooting ■ XM . l / h on the remote control) repeatedly. ■ Remote control Problem The remote control does not work or function properly. Cause Remedy Wrong remote control codes" at the end of this manual. Try setting another code of the same manufacturer using "List of remote control codes
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 103
    Troubleshooting number of the connected HDMI components. Check that the connected HDMI components support the HDCP copy protection standards. Set "HDMI UP SCALING" to "THRGH is a problem with the signal path from your iPod to this unit. Turn off this unit and reconnect the Yamaha iPod universal
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 104
    Troubleshooting During AUTO Notes • If the "ERROR" or "WARNING" screens appears, check the cause of the problem, then run "AUTO SETUP" again. • If a warning message "W-1" appears, corrections are 10" occurs repeatedly, contact a qualified Yamaha service center. See page 13 - - 13 - 28 13 72 100 En
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 105
    RESETTING THE SYSTEM Resetting the system Use this feature to reset all the parameters of this unit to the initial factory settings. Notes • This procedure completely resets all the parameters of this unit including the "SET MENU" parameters. However, the advanced setup menu parameters will not be
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 106
    GLOSSARY Glossary ■ Bi-amplification connection A bi-amplification connection uses two amplifiers for a speaker. One amplifier is connected to the woofer section of a loudspeaker while the other is connected to the combined mid and tweeter section. With this arrangement each amplifier operates
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 107
    is now rapidly gaining popularity in movie theaters around the world. DTS, Inc. has developed a home theater system so that you can enjoy the as a set-top box or AV receiver) and an audio/video monitor (such as a digital television), HDMI supports standard, enhanced or high-definition video as
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 108
    to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the audiovisual experience of a movie theater in the listening room of your own home. ■ SILENT CINEMA Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for headphones have been set for
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 109
    PARAMETRIC EQUALIZER INFORMATION Parametric equalizer information This unit employs Yamaha Parametric Room Acoustic Optimizer (YPAO) technology to optimize the frequency characteristics of its parametric equalizer to match your listening environment. YPAO uses a combination of the
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 110
    , 20 Hz to 20 kHz, 50 W, 8 0.06% or less • Signal to Noise Ratio (IHF-A Network) PHONO (MM, 5 mV) to OUT (REC) [Europe model 81 dB or more [U.S.A. and Canada models 86 dB or more CD, etc. (Effect Off, 250 mV) to Front L/R 100 dB or more • Residual Noise (IHF-A Network) Front L/R 150
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 111
    .......... 69 2ch Enhancer, Sound field program .... 46 2ch STEREO, Sound field program .... 46 3 OPTION MENU, Manual setup ....... 70 7ch Enhancer, Sound field program .... 46 7ch STEREO, Sound field program .... 46 96/24 indicator 27 ■A A)DISPLAY SET, Option menu ......... 81 A)I/O ASSIGNMENT
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 112
    27 Input channels, Multi channel input settings 80 Input menu, Manual setup 69 Input rename, Input menu 79 Input signal indicators 26 menu 76 LVL, Auto setup result 30 ■M Manual preset tuning, FM/AM tuning 51 MANUAL SETUP 69 Manual setup 69 Manual tuning, FM/AM tuning 50 MAX VOL.,
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 113
    without surround speakers 46 SOUND MENU, Manual setup 72 Sound menu, Manual setup 69 Source feature OSD display time jack connection 22 Supplied accessories 3 SUPPORT AUDIO, HDMI setting ..... 77 Support audio, HDMI setting 77 SUR. Troubleshooting 94 ADDITIONAL INFORMATION English 109 En
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 114
    name of the parts on the front panel or the remote control. Refer to the attached sheet or the pages at the end of this manual for the information about each position of the parts.
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 115
    ■ Front panel 1 234 5 6789 0 STANDBY /ON VOLUME SPEAKERS EDIT SEARCH MODE PRESET/TUNING FM/AM CATEGORY A/B/C/D/E l PRESET/TUNING/CH h MEMORY DISPLAY TUNING AUTO/MAN'L NIGHT SLEEP PHONES TONE CONTROL SCENE 1 2 3 4 PROGRAM STRAIGHT PURE DIRECT AUDIO SELECT INPUT OPTIMIZER MIC
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 116
    ■ Remote control U VW A CODE SET TRANSMIT POWER TV POWER AV STANDBY POWER MD MULTI CH IN AUDIO SEL CD CD-R DVD CBL DTV TUNER XM DOCK V-AUX DVR VCR PHONO TV VOL TV CH AMP VOLUME SOURCE TV B C D E TV MUTE TV INPUT MUTE CLASSICAL LIVE/CLUB ENTERTAIN 1 2 3 MOVIE 4
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 117
    HUGHES NETWORK SYSTEMS 11142, 11442 PHILIPS 11142, 11442 PROSCAN 10392 RCA 11392 SAMSUNG 11442 SHARP 11489 SONY 10639, 11640 SATELLITE RECEIVER AIWA 11514, 11515 ALPHASTAR 10772 AUSTAR 10879 BELL EXPRESSVU 10775 CHAPARRAL 10216 DIRECTV 11377, 10392, 10566, 10639, 11639, 11142
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 118
    CARVER 20054, 20170 CCE 20037 CELEBRITY 20000 CELERA 20765 CHANGHONG 20156, 20765, 20767, 20783 CINERAL 20092, 20451 CITEK 20047 CITIZEN 20000, 20030, 20054, 20060, 20092, 20171, 20180, 20186, 20451, 20463 CLARION 20180 CLASSIC 20030, 20092 COLORTYME 20017, 20030, 20047, 20054,
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 119
    20178 WESTINGHOUSE 20000, 20451, 20885, 20889 WHITE WESTINGHOUSE 20179, 20236, 20451, 20463, 20623, 20889 WORLD 20180, 20236, 20451, 20463 XR-1000 YAMAHA YORX ZENITH 20154, 20171, 20179, 20180 20030, 20650, 20769, 21405, 21406, 21407, 21522 20030 20000, 20017, 20030, 20037, 20047, 20092
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 120
    VCR A-MARK 30037, 30240, 30000 ABS 31972 ADMIRAL 30060, 30048, 30039, 30047, 30104, 30209 ADVENTURA 30037, 30240, 30000 AIWA 30037, 30000, 30307, 30348, 31284, 31291, 31332, 31336 AKAI 30041 ALBA 30209 ALIENWARE 31972 ALLEGRO 30039 AMERICAN HIGH 30035, 30081 AMSTRAD 30000
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 121
    30047, 30081, 30033, 30240, 30045, 30000, 30042, 30043, 30041, 30038 WHITE WESTINGHOUSE 30000, 30209 WORLD 30209 XR-1000 30035, 30240, 30000 YAMAHA 30041, 30038 ZENITH 30037, 30039, 30033, 30000, 30209, 30041, 30034, 31479 ZT GROUP 31972 DVD PLAYER 3D LAB 40503, 40539 ACCURIAN
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 122
    40241 QUASAR 40204 REALISTIC 40203 SEGA 40023 SHARP 40001 SONY 40193, 40201 TECHNICS 40204 TOSHIBA 40059 VICTOR 40245 WARDS 40059 YAMAHA 40217 DVD RECORDER ACCURIAN 51416 APEX DIGITAL 51056 ASPIRE DIGITAL 51168 COBY 51086 CYBERHOME 51129 DENON 50490 EMERSON 50675 FUNAI
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 123
    , 81675 TECHWOOD 80281 THORENS 81189 TOSHIBA 80080, 80135, 80842 VENTURER 81390 VICTOR 80074 WARDS 80158, 80014, 80080 XM 81406, 81414, 81846 YAMAHA 81023, 80176, 80186, 80376, 81176, 81276, 81331, 81375, 82004 (TUNER ID1) 82005 (TUNER ID2) 81949 (XM ID1) 82006 (XM ID2) 82007
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 124
    ■ Front panel U HTR-6080/HTR-6060 1 234 5 6 7 89 0 STANDBY /ON VOLUME SPEAKERS EDIT SEARCH MODE PRESET/TUNING FM/AM CATEGORY A/B/C/D/E l PRESET/TUNING/CH h MEMORY DISPLAY TUNING AUTO/MAN'L NIGHT SLEEP
  • Yamaha HTR-6080BL | MCXSP10 Manual - Page 125
    ■ Remote control U VW A CODE SET TRANSMIT POWER TV POWER AV STANDBY POWER MD MULTI CH IN AUDIO SEL CD CD-R DVD CBL DTV TUNER XM DOCK V-AUX DVR VCR PHONO TV VOL TV CH AMP VOLUME SOURCE TV B C D E TV MUTE TV INPUT MUTE CLASSICAL LIVE/CLUB ENTERTAIN 1 2 3 MOVIE 4
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
HTR-6080
HTR-6080
AV Receiver
OWNER’S MANUAL
U