Yamaha MCR-040GN Owners Manual - Page 20

TROUBLESHOOTING The following status messages appear only if you are using MCR-140. Status message iPod Linked iPod iPod Unlinked iPod Low Batt. Cause Wireless connection was successful. Remedy Wireless connection has disconnected. The battery of the iPod is getting flat. Connect the iPod to the transmitter and start playback. Set it in the charging cradle. page 5 5 The following LED statuses of the status indicator refer to the transmitter. LED status Off Flashes green Flashes green once Lights up green Lights up green and flashes red for 2 seconds Lights up green and keeps flashing red Flashes red Flashes red once Flashes red 2 times continuously (regardless of green status) Transmitter status The transmitter is in standby mode. An iPod is not connected or wireless communication has not been established. Connection in progress. Adjusting the volume level or operating with the remote control. Wireless communication between the unit and transmitter is established. An unsupported iPod is connected. Remedy Please wait. Only iPod (5th generation), iPod classic, iPod nano, and iPod touch are supported. Connection failed. Connect again. Error occurs. The volume of the unit is set to maximum or minimum. The battery of the iPod is low. Remove the iPod from the transmitter, and connect again. Set the iPod in the charging cradle. page - 5 8 8 5 16 En