Yamaha MCS-1330 Owner's Manual - Page 9

INTRODUCTION Remote control iPod CD USB FM/AM PHONO AUX PRESET TUNING MEMORY Input selection keys ■ Common functions 1 2 3 iPod CD USB FM/AM PHONO AUX PRESET TUNING MEMORY REPEAT RANDOM iPod MENU SEL MENU ENTER VOL VOL 5 TONE BALANCE DISPLAY DIMMER SLEEP 4 PURE DIRECT MUTE 6 7 8 9 CONTROLS AND FUNCTIONS This remote control can operate the system components (including tuner functions) and an iPod stationed in a terminal on the top of the receiver. To operate the CD player, tuner functions, or an iPod using the remote control, you need to set the receiver to the corresponding input mode. To switch the input mode of the receiver Press the corresponding input selection key on the remote control (or rotate INPUT on the front panel). The name of the corresponding input source appears in the front panel display of the receiver. y When CD or USB is selected as an input source, the CD player turns on automatically and when other input source is selected, the CD player sets to standby mode. Operations common to all modes The following operations are available for the receiver when it is set to any input mode. 1 Infrared signal transmitter Sends signals to the system you want to control. 2 (standby/on) Turns the system on or sets it to the standby mode. Note Even when the system is in standby mode, it consumes a small amount of power in order to receive infrared-signals from the remote control. 3 Input selection keys Select the input source on the receiver. 4 PURE DIRECT Turns on or off the Pure Direct mode (see page 12). 5 VOL +/- Adjusts the overall volume level on the receiver. 6 TONE/BALANCE / Adjusts the audio quality (see page 12). 7 SLEEP Sets the sleep timer on the system (see page 13). 8 MUTE Turn off the volume (see page 12). 9 DIMMER Changes the brightness of the front panel display (see page 13). English 5 En