Yamaha MCX-C15P Owners Manual - Page 49
Sleep mode
View all Yamaha MCX-C15P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
00_MCX-C15_Owner_UB.book Page 48 Tuesday, April 20, 2004 9:32 PM SYSTEM OPTIONS 4 Press u / d to choose "Variable" or "Fixed" and press SELECT. AUDIO OUT Variable Fixed Variable Fixed Controls the playback volume and tone using the client settings. Controls the playback volume and tone using the external component settings. In this case, you cannot control the playback volume and tone using the client. Notes • Depending on the settings of the external component you are using, this function may not work as described above. • If "Fixed" is selected in step 4, the volume output level of your client is set to maximum. In this case, adjust the volume level on the connected component before starting playback. Sleep mode If you will not be using your client for an extended period, you can place it in sleep mode. Power consumption is reduced in sleep mode, but the client still consumes a small amount of power to keep the display and remote control signal receiver in operation. MCX-3 WD01440 LIBRARY MUTE VOL FAVORITES 1 2 3 4 button SELECT MENU 1 PLAY INFO. PAUSE 2 INPUT BOOKMARK RANDOM 3 STOP 4 5 REPEAT 6 GROUP PLAY 7 GROUP S RECALL OFF TIMER ON TIMER Press . The message "Please wait." is displayed and the client switches to sleep mode. The current time appears in the display. Please wait. PM y To display the time correctly, check the server connections, or change the time display setting on the server as follows: Press u / d to choose "System Setup" - "Date/ Time" - "Time Display", then choose "24 hours" or "12 hours (AM/PM)", and press SELECT. Press u / d / j / i to choose "OK" and press SELECT. Note The client automatically switches to sleep mode if no operation is performed for 30 minutes. 48