Yamaha MCX-SP10 MCXSP10 Manual - Page 3

PLACING THE SPEAKERS I Using the supplied stands Attach the speaker stands supplied to stand the speakers on flat surfaces such as a table-top or desk. 1. Insert the mounting pins on the lower arm of the stand into the holes on the bottom of the speaker. 2. Insert 2 self-tapping screws (diameter: 3.5 to 4 mm) into the wall, 40 mm apart. 40mm 3. Mount the speaker on the screws by positioning it so that the screws on the wall fit snugly into the holes on the mounting bracket. 2. Use a screwdriver to tighten the screws on the upper arm of the stand, so the speaker is tightly mounted. I Mounting the speaker on a wall Use the brackets on the rear of the speakers to mount the speaker on a wall. 1. Attach the pads to the rear of the speaker, as illustrated. Mounting bracket 4mm 20mm or more Cautions • This speaker weighs 1.2 kg (2 lbs 10 oz). Do not mount it on thin plywood or a wall with soft surface material. If mounted, the screws may come loose from the flimsy surface and the speaker may fall. This damages the speaker and may cause personal injury. • Do not use nails, adhesives, or other unstable materials to mount the speakers. Long-term use and vibrations may cause it to fall. • To avoid accidents resulting from tripping over loose speaker cable, fix it to the wall. • This speaker features a magnetically shielded design, but there is still a chance that placing it too close to a TV set might impair picture color. Should this happen, move the speaker away from the TV set. Pad 2