Yamaha MDX-9 Owner's Manual - Page 19
Part Erase, COMBINE
View all Yamaha MDX-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH Part Erase This operation lets you erase part of a track. 1 Press # PLAY/* PAUSE to play the track containing the part you want to erase. 2 Use SEARCH ! or ⁄ to locate the beginning of the part you want to erase (point A), then press # PLAY/* PAUSE to pause at that point. 3 Press EDIT repeatedly to display "A-B Erase?", then press ENTER. Point A (from step 2) is registered and "Erase A-_" appears in the display. 4 Use # PLAY/* PAUSE and SEARCH ⁄ to locate the end of the part you want to erase (point B). 5 Press ENTER to register point B. "Check" appears, then the part you specified plays repeatedly and "Erase A-B?" appears in the display. To adjust point B Turn the jog dial while the "B" of "Erase A-B?" is blinking Point B can be adjusted up to 2 second (176 steps) in either direction. 6 Press ENTER again. The part is erased and "Complete" appears momentarily. To cancel before erasing the part Press CANCEL (or & STOP). To undo ERASE 1 Press & STOP to set this unit to stop mode. 2 Press EDIT repeatedly to display "Undo Erase", then press ENTER. "Undo OK ?" appears in the display. 3 Press ENTER again to undo. To cancel, press CANCEL (or & STOP). To erase parts spanning more than one track Use the COMBINE function described below to combine the tracks into one track before performing this operation. Note After part erase, a new track number is automatically assigned to the section starting after point B. COMBINE This function lets you combine two consecutive tracks into one. After you combine the tracks, the total number of tracks decreases by one and the tracks following the combined tracks are renumbered. s NATURAL SOUND MINIDISC RECORDER TIMER OFF REC PLAY MDX-9 ) POWER DISPLAY TITLE CHARA. DELETE EDIT ! SEARCH ⁄ REC LEVEL SET INPUT REC & STOP CANCEL ENTER - $ + › 0 10 # PLAY/ * PAUSE CANCEL 3 3,4 2 1 1 Press & STOP to stop playback. 2 Turn the jog dial to select the second track of the two you want to combine. 3 Press EDIT repeatedly to display "Combine ?", then press ENTER. "Check" appears momentarily, then the unit plays the 4 seconds before and after the point where the tracks will be connected. "(track number) + (track number) OK?" appears in the display. 4 Press ENTER again. The tracks are combined and "Complete" appears momentarily. To cancel before combining the tracks Press CANCEL (or & STOP). To undo COMBINE 1 Press & STOP to set this unit to stop mode. 2 Press EDIT repeatedly to display "UndoCombine", then press ENTER. "Undo OK ?" appears in the display. 3 Press ENTER again to undo. To cancel, press CANCEL (or & STOP). Notes • This operation is not possible when track 1 is selected. • You can also divide the track later using the DIVIDE function. • If "Can't Edit" appears in the display the tracks cannot be combined. This sometimes happens when you have edited the same track many times. This is due to the technical limitations of the MD system and is not a mechanical error or malfunction. 19